Datatool Alarm System 3 problems

Even with a brand new battery it's worth charging. Otherwise it'll never reach it's full efficiency.

I'd be inclined to take it back and ask for a new battery with acid for you to put in.

Lol! Sorry guys when I said new in the last post, I thought that was like a week or so ago but apparently its more like a month or more... So the battery had been standing at least 4 weeks... oops!

Lost all track of time lately lmao! Hopefully have her running tomorrow morning

Th alarm has probably drained it in that time period.

[Jayneflakes]

My Datatool will flatten the battery if the bike is not used for over two weeks, the best bet is to either use the bike, fit a trickle charger or put the alarm into storage mode.

As for the pin code, I have to count the flashes of the LED to enter the pin, but to get there the alarm will have triggered for thirty seconds. It is bloody noisy and not what you want at three in the morning!

To enter service mode or storage mode, I have to press and hold the two buttons on the fob for ten seconds. The alarm beeps once to tell me is set and the engine is immobilised.

The alarm shouldn't bring a brand new battery down to 8.8v in four weeks.

When I've disconnected the datatool alarm and reconnected it, the alarm goes off and the fob does nothing, stick some eat plugs in and press the buttons on the fob, eventually it stops and all is well.

Battery was up to 12.88v according to my meter this morning plugged it in and started first time... Sorry guys, cant believe I didn't check that out first lol

Booked MOT for next Tuesday cant wait to go for a ride