Repairing my K5 after highside

Probably an 1100 again but maybe with some colour...

Well I've pieced her back together as best I can.
-new mirrors
-new indicators
-new pegs
-2nd hand rhs footrest hanger
-2nd hand front brake cylinder.

Now she won't start =(

Ignition turns on and dash lights up. Headlights are on and bright. Indicators work. Brake micro switches work. Red cut-off switch works. But not a scooby when pressing the start button.

Battery voltage at 12.5V.

Gonna run through the trouble shooting manual tomorrow.

Originally Posted by phil24_7

Don't hit it, bend it (a vice will help). By hitting it you will risk breaking it. If you have nothing to bend it with then hit it gently!!!

I heated it gently, slid a short scaffold pole over it and bent a lil bit at a time in stages...bit by bit whilst it was still on the bike.

Cheers. Got my bike running just now. Turns out the clutch lever position connector had come off the back. Weird.