Airblade Screen - Page 2 - SV650.org

19-01-05, 10:21 AM

I had a Powerbronze one (think identical to airblade) and found that I had to trim the odd plastic 'bolts' which the screws at the top go into as they seem to be heat melted for the original screen to go on. I just trimmed with a blade a bit. Theres still enough screw thread there and it all fits nicely. This will make sense I hope if you try and fit one. Basically the plastic 'blobs' are too big with the replacement screen.

mattSV · 19-01-05, 07:24 PM

http://forums.sv650.org/viewtopic.ph...735&highlight=

Have recently fitted a Zero Gravity dark tint DB to my SV1000 - see above link for more info

20-01-05, 01:03 PM

Quote:

Originally Posted by The Mass

I was going to ask about DB screens, and have been looking at the airblade, nice screens

But I wanted to ask if you can get them for the K4 or any other makes for the K4?

The K3 Airblade screens fit the K4 (a bit of a bugger to get in, but I think they would be on a K3 too! Nothing too tricky though).

I've got a smoked DB one. It doesn't look DB at all to me though. Very subtle. Looks good and keeps the wind off though.

26-01-05, 09:08 PM

Quote:

Originally Posted by chris SVK3

Here you mate hope this helps

http://cgi.ebay.co.uk/ws/eBayISAPI.d...948738963&rd=1

Has anyone fitted one of these on a K4 yet?

Big Bad Al · 27-01-05, 08:25 AM

mines on order from vyxxn. Iridium for the K4 at £60 inc p&p. I'll let you know when it arrives and will get a picture up if possible.

Al.

27-01-05, 10:14 AM

Quote:

Originally Posted by chris SVK3

Hi Guys, has anybody fitted the airblade screen for the K3 sv. I have just fitted my screen and there seems to be a gap underneath the top of screen at the sides where in meets the fairing is this normal or have i done some thing wrong??

i have the same problem with my K4, i think that the raised fixings on the back of the black inside fairing trim are too long , i think that if they are trimmed back with a stanley knife that the fit will be better.

27-01-05, 08:46 PM

Quote:

Originally Posted by Jdubya

Quote:

Originally Posted by chris SVK3

Here you mate hope this helps

http://cgi.ebay.co.uk/ws/eBayISAPI.d...948738963&rd=1

Has anyone fitted one of these on a K4 yet?

Okay, I spoke to the guy at biker bitz today and he reckons the k3 screen will not fit the k4... anyone care to disagree?

19-01-05, 07:24 PM	#12
mattSV Member Mega Poster Join Date: Jul 2003 Location: Darn sarf, innit Posts: 2,025	http://forums.sv650.org/viewtopic.ph...735&highlight= Have recently fitted a Zero Gravity dark tint DB to my SV1000 - see above link for more info __________________ 2000 - 2004 SV650S 2004 - 2009 SV1000S 2009 - 2013 Triumph Sprint ST1050 2013 - 2016 Triumph Explorer 1200 2016 - Ducati Multistrada DVT S

27-01-05, 08:25 AM	#15
Big Bad Al Member Join Date: Jul 2004 Location: West London Posts: 188	mines on order from vyxxn. Iridium for the K4 at £60 inc p&p. I'll let you know when it arrives and will get a picture up if possible. Al. __________________ SFV650 in black with Evotech tailtidy, R&G Aeros and Heated Grips, Puig fly screen, Pipe Werx GP style race exhaust. Whoop! Previously.... Black SVS - DHM's Heated Grips Airblade Iridium Double Bubble Screen Beowulf end can and Evotech tailtidy. 3/7/2004 - 26/6/2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Airblade	Kaikoura	SV Talk, Tuning & Tweaking	4	25-04-09 06:38 PM
AIRBLADE Dark Smoked Screen	gralln9	For Sale - SV's and SV related items	1	25-03-09 05:48 AM
Airblade screens?	Binky	SV Talk, Tuning & Tweaking	8	29-07-08 09:44 AM
AirBlade or DB Screen for Curvey	BigBaddad	Stuff Wanted	0	17-04-07 09:38 AM
Airblade screen for K4.	Big Bad Al	Bodywork	11	26-05-05 01:50 PM

19-01-05, 10:21 AM	#11
Anonymous Guest Posts: n/a	I had a Powerbronze one (think identical to airblade) and found that I had to trim the odd plastic 'bolts' which the screws at the top go into as they seem to be heat melted for the original screen to go on. I just trimmed with a blade a bit. Theres still enough screw thread there and it all fits nicely. This will make sense I hope if you try and fit one. Basically the plastic 'blobs' are too big with the replacement screen.