Replace broken gear lever? - Page 2 - SV650.org

17-04-08, 11:18 AM

Quote:

Originally Posted by yorkie_chris

They can be annoying, dizzyblondes yellow bike was a pig for this, the levers were so stiff, I ended up using the big hammer method.

Tried the big hammer method didnt work so ended up using hot water to expand it, straight out

19-04-08, 12:27 PM

turns out something disconnected in the clutch so they were able to fix it easily. Back on the road and waiting for a dry day to ride!

29-07-09, 10:38 AM

Did you have much of a problem repairing or replacing your left front turn signal? I have one broken off now and am seeking guidance on how to replace or repair. I think it must have broken off while I was pulling off a rather substantial fabric bike cover from my 2002 SV650S.
Thanks!

30-07-09, 08:57 AM

yea if I remember correctly it was a dodle. Take the fairing off, disconnect old wires and then feed through the hole in the fairing and connect.

19-10-12, 10:21 PM

My clutch lever broke off tonight when the side stand was not fully extended by myself!!!! What a %%%% I am...broke my front left indicator too...gear lever bent!!! Just a lapse of concentration!!!Costly!!!!!

19-04-08, 12:27 PM	#12
thinman Guest Posts: n/a	Re: Replace broken gear lever? turns out something disconnected in the clutch so they were able to fix it easily. Back on the road and waiting for a dry day to ride!

29-07-09, 10:38 AM	#13
danco1 Guest Posts: n/a	Re: Replace broken gear lever? Did you have much of a problem repairing or replacing your left front turn signal? I have one broken off now and am seeking guidance on how to replace or repair. I think it must have broken off while I was pulling off a rather substantial fabric bike cover from my 2002 SV650S. Thanks!

30-07-09, 08:57 AM	#14
thinman Guest Posts: n/a	Re: Replace broken gear lever? yea if I remember correctly it was a dodle. Take the fairing off, disconnect old wires and then feed through the hole in the fairing and connect.

19-10-12, 10:21 PM	#15
Paul Locker Guest Posts: n/a	Re: Replace broken gear lever? My clutch lever broke off tonight when the side stand was not fully extended by myself!!!! What a %%%% I am...broke my front left indicator too...gear lever bent!!! Just a lapse of concentration!!!Costly!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to straighten a bent gear lever? (heat it up first? or what?), ---possible fix or recipe for snapped of gear lever :-)	martin_SV	SV Talk, Tuning & Tweaking	10	30-07-08 08:40 PM
K5 Pointy 650S right hand wing mirror, gear lever and clutch lever.	Bayside GTR	Stuff Wanted	0	29-10-07 11:24 PM
2 left indicators + clutch lever + gear lever for pointy k6	enduroman	Stuff Wanted	3	06-09-07 09:26 PM
A broken Gear change lever (Mk1SV)	Viney	Stuff Wanted	2	19-07-07 02:04 PM
Broken Gear Lever	*Steve*	Bikes - Talk & Issues	11	04-06-06 10:43 PM