Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi all, I was going to go and buy a paddock stand from my local shop tomorrow but about ten more mins up the road and I would be at Abba so was wondering if they are worth the extra dosh?
Are they stable enough to work on the bike safely? Thanks for your replys. |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Mar 2007
Posts: 9,097
|
![]()
Yes, every penny
__________________
We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius |
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Aug 2005
Location: Fleet, Hampshire
Posts: 2,448
|
![]()
Completely worth it. If you're going to get serious with pulling the bike to bits look at a headstock stand too.
__________________
Don't want to be the quickest; don't want to be the best; just want to be the one having the most fun. XL125Varadero -> Curvy SV650N-Y -> SV1000N-K3 -> Multistrada 1200s Twin-tastic stuff. Minister for Sustainability Aliquid prudentissimus delectabiles et intelligentes in adamasset lingua. |
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: May 2012
Location: South East London
Posts: 1,095
|
![]()
absolutely fantastic bits of kit, can be had cheap on ebay too...wish I'd thought of looking there before I bought off Abba haha
|
![]() |
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: May 2012
Location: South East London
Posts: 1,095
|
![]()
I'll be buying the front end lifting kit for when I eventually do the gsxr front end conversion
|
![]() |
![]() |
![]() |
#6 |
Member
Mega Poster
Join Date: Aug 2005
Location: Fleet, Hampshire
Posts: 2,448
|
![]()
If you see one going cheap on ebay or gum tree but for the wrong bike, buy it then but the correct adaptor pins for it. I think the stand is the same apart from a few exotic single-siders.
BEWARE they also sell lifts for off-roaders. They are NOT what you are looking for. Neither is the front lifter thing that lifts on the exhaust header.
__________________
Don't want to be the quickest; don't want to be the best; just want to be the one having the most fun. XL125Varadero -> Curvy SV650N-Y -> SV1000N-K3 -> Multistrada 1200s Twin-tastic stuff. Minister for Sustainability Aliquid prudentissimus delectabiles et intelligentes in adamasset lingua. |
![]() |
![]() |
![]() |
#7 |
Member
Mega Poster
Join Date: May 2012
Location: South East London
Posts: 1,095
|
![]()
yeah it's just the connecting bolts/pins that you need, I believe the stand itself is universal minus SSSA bikes. they're honestly brilliant bits of kit. I'll also be buying the swing arm removal kit at some point as I bet it's gagging for a bit of loobing up
![]() |
![]() |
![]() |
![]() |
#8 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,071
|
![]()
Yes get one.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
![]() |
![]() |
![]() |
#9 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
No they still work on SSSA, pin still goes through frame...
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
I've got this one...
http://www.ghostbikes.com/products/g...ock-stand.html Cracking bit of kit even though the ripped daviesv's fixer peg idea off ![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
xbox kinect - worth the money?? | kellyjo | Idle Banter | 19 | 25-11-10 04:12 PM |
Worth a punt ..... or waste of money ... | LK-SV | Bikes - Talk & Issues | 4 | 10-11-09 11:22 PM |
Paddock stand/abba stand or? | Ruthja2801 | Bikes - Talk & Issues | 18 | 26-02-09 12:20 PM |
Worth the money? | cb5_keith | SV Talk, Tuning & Tweaking | 19 | 09-05-08 06:41 PM |
center stand / abba stand? | New Leaf | Bikes - Talk & Issues | 3 | 29-01-08 01:58 PM |