Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hello I have a early sv that will not run on the rear cylinder .i have done a compression check and its the same as the front.i removed the head and all valves seem to be ok.i have also changed the carbs but it still oils up the plug and wont start unless I warm the plug.help
|
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Dec 2007
Posts: 2,708
|
![]()
Is it starting on both cylinders when you warm the plug or just the one? i.e.: does it run on the rear cylinder at all?
|
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,071
|
![]()
Is there a spark at the rear plug?Are you sure it is oiling up or could it be fouling with unburnt fuel?If its oil it must be coming down the valve guides or via worn piston rings/bores.Fuel fouling could be flooding carb or no spark.I assume you already checked all this before taking the lid off.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
![]() |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jul 2003
Location: Hertfordshire
Posts: 1,422
|
![]()
Have you checked the coils?
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
+1 If plug is OK, I would also suspect coil or a leak between coil and plugs.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear cylinder not firing after front cylinder rebuild | Littlewebber | Bikes - Talk & Issues | 2 | 17-07-13 08:45 PM |
Bike refuses to warm up, Triumph Tiger. | Galviniser | Bikes - Talk & Issues | 19 | 10-04-13 09:41 AM |
TDC on the rear cylinder? | 5hort5 | SV Talk, Tuning & Tweaking | 9 | 01-01-10 03:25 AM |
Crash.NET - West refuses to give up on MotoGP dream. | NewsBot | News | 0 | 22-10-08 06:40 PM |
RTA where party refuses to give details | Red ones | Idle Banter | 31 | 21-08-06 12:10 PM |