 |
 |
05-08-05, 03:45 PM
|
#1 |
|
Guest
Posts: n/a
|
Hamicad tail tidy ......
.... will be fitting tommorrow.
Instructions reckon an hour - anyone validate this or have any other hints to avoid unforeseen pitfalls? Cheers |
|
|
05-08-05, 03:52 PM
|
#2 |
|
Guest
Posts: n/a
|
You can do it in an hour, yes. The only properly fiddly bit is doing the bolts back up once you've got the hamicad back on; the undertray covers them so you have to flex it to get to them.
|
|
|
|
05-08-05, 05:02 PM
|
#3 |
|
Guest
Posts: n/a
|
Cheers!
|
|
|
|
06-08-05, 12:28 PM
|
#4 |
|
Guest
Posts: n/a
|
mines on order!
|
|
|
|
07-08-05, 05:33 PM
|
#5 |
|
Guest
Posts: n/a
|
Got round to fitting it this morning.
Fairly Straight forward, instructions are pretty good, and no major fitting problems - apart from (right at the end) dropping the seat release cable bolt back into the seat cowl area and having to take it all off again - doh!  I presume most people also change their number plate at the same time? as I had to drill two new holes to refit the stock one, and it (just) fits, so will probably get a slightly smaller one. What do people do about the rear reflector which I believe is needed for MOT? |
|
|
|
16-08-05, 06:25 PM
|
#6 |
|
Member
Join Date: Oct 2003
Location: West Midlands
Posts: 281
|
this is where i put mine used the std reflector, i made a metal bracket and bent it around so that it sits on top of the number plate light then i drilled a hole in the top of the light and secuered it with a m3 screw and nylock nut
|
|
|
|
17-08-05, 12:10 PM
|
#7 |
|
Guest
Posts: n/a
|
the hardest thing i found was taking out the little black popper fittings which hold it together
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hamicad Tail Tidy | Fleagle | For Sale - SV's and SV related items | 6 | 03-05-07 07:44 PM |
| Hamicad Tail Tidy | amuli | For Sale - SV's and SV related items | 7 | 29-03-07 12:47 PM |
| Hamicad Tail Tidy | a1a | SV Talk, Tuning & Tweaking | 3 | 25-12-05 02:40 PM |
| Do I need to fit Hugger if I have tail tidy (Hamicad)? | jump | SV Talk, Tuning & Tweaking | 13 | 22-04-05 05:34 PM |
| Just received my Hamicad tail tidy... | jump | SV Talk, Tuning & Tweaking | 7 | 20-04-05 10:26 PM |
