SV650.org - SV650 & Gladius 650 Forum
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Scottoiler Dispenser Nib Position (http://forums.sv650.org/showthread.php?t=152648)

SVGrandad 04-06-10 03:35 PM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by yorkie_chris (Post 2286885)
Yeah you can't have it so it gets ripped off every time you let it roll back 6"!
Have not found this problem with the twin injector, but no doubt Mr Squid will put me right on that :p

dyzio 04-06-10 05:18 PM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by SVGrandad (Post 2287097)
Have not found this problem with the twin injector, but no doubt Mr Squid will put me right on that :p
I found the dual injector more difficult to set up to be honest and went to the single one.

yorkie_chris 05-06-10 09:09 AM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by SVGrandad (Post 2287097)
Have not found this problem with the twin injector, but no doubt Mr Squid will put me right on that :p
I do not have that problem with single one either when it is fitted right

jacksuzukisv650 05-06-10 09:12 AM
Re: Scottoiler Dispenser Nib Position
 
my is facing 5 o clock works fine

Sid Squid 05-06-10 09:36 PM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by SVGrandad (Post 2287097)
Have not found this problem with the twin injector, but no doubt Mr Squid will put me right on that :p
Either one can be fitted wrong. The most mangled one I've seen was a twin tube. Wwhatever the accessory and whether it works or not - it needs to be fitted right.

My correctly functioning single has been on my bike for more than 120,000 miles.

xXBADGERXx 05-06-10 09:49 PM
Re: Scottoiler Dispenser Nib Position
 
I have mine at the 5 O`Clock position on the sprocket and set about 4mm away from the chain and the taper is just about off the sprocket , the centrifugal force of oil dispensed onto the sprocket will send it onto the chain . It doesn`t get ripped out when backed up and has worked effortlessly since install , not lost a nib yet .

Lozzo 06-06-10 08:14 AM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by yorkie_chris (Post 2286790)
You need to get it in the right spot so it doesn't get ripped off when backing up.
In other words, not rubbing on the sprocket or chain

Lozzo 06-06-10 08:17 AM
Re: Scottoiler Dispenser Nib Position
 
Quote:
Originally Posted by SVGrandad (Post 2287097)
Have not found this problem with the twin injector, but no doubt Mr Squid will put me right on that :p
The twin injectors seem to be far more unpopular than the single, and as I won't fit a twin spouter to my bike I'm guaranteed my Scottoiler will work nicely. Everyone I know who bought a twin injector has gone back to the single set up.

Philbo 06-06-10 09:16 AM
Re: Scottoiler Dispenser Nib Position
 
If you're still in any doubt, or just want some free spares, contact Scottoiler directly. Best customer service I think I've come across for anything, anywhere...although Hood are pretty good too.:cool:

Sruffy 06-06-10 11:32 AM
Re: Scottoiler Dispenser Nib Position
 
Thanks to everyone for their advice and tips. It is much appreciated.

Does anyone have any pics they can upload showing how they have positioned the nib in place. Thanks in advance


All times are GMT. The time now is 05:08 PM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.