SV650.org - SV650 & Gladius 650 Forum

Page 3 of 3

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Front cog nut! Arrr! (http://forums.sv650.org/showthread.php?t=120497)

Dangerous Dave

02-11-08 10:52 AM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by Warthog (Post 1673774)

We managed mine with just fat mate on bike, 1st gear, break on, and longish breaker bar. It still took a lot of trying though!

Yeap, that is the mans way! A piece of wood is needed for the weaker mechanics... :p

pencil shavings

02-11-08 12:42 PM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by Dangerous Dave (Post 1673766)

Nothing different on the K3, I would guess it could be the fact the sprocket has been there for 5 years!

By differance I ment the aplication of red loctite, as that it what was holding mine on.

I guess we will see when Cam_73 finally get it off if it has red loctite on it too.

Dangerous Dave

02-11-08 12:44 PM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by pencil shavings (Post 1673900)

By differance I ment the aplication of red loctite, as that it what was holding mine on.

Comes with loctite from the factory, whether you use it afterwards is a personal/mechanics preference, which makes it no different to every other SV.

yorkie_chris

02-11-08 12:48 PM

Re: Front cog nut! Arrr!

I use loctite, and a big cracking bar to get them off again.

pencil shavings

02-11-08 01:00 PM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by Dangerous Dave (Post 1673903)

Comes with loctite from the factory, whether you use it afterwards is a personal/mechanics preference, which makes it no different to every other SV.

ah right :thumright: now I know!

I didnt put any on mine when I put on the new one, should i have?

Lissa

02-11-08 01:04 PM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by Dangerous Dave (Post 1673801)

Yeap, that is the mans way! A piece of wood is needed for the weaker mechanics... :p

The woman's way is the impact driver...............why make things harder than they need be:p

Just don't do as I did, girls, and lean your boob against the driver..............it bruises soft bits:D

Dangerous Dave

02-11-08 01:07 PM

Re: Front cog nut! Arrr!

Quote:

Originally Posted by pencil shavings (Post 1673920)

I didnt put any on mine when I put on the new one, should i have?

Like I said, its a personal preference and i don't on my own bikes.

Quote:

Originally Posted by Lissa (Post 1673923)

Just don't do as I did, girls, and lean your boob against the driver..............it bruises soft bits:D

:smt044

yorkie_chris

02-11-08 02:06 PM

Re: Front cog nut! Arrr!

I use loctite because I couldn't be rsed getting a new nut. But then again I couldn't be rsed putting the front cover on either, so can very easily check if it's backed off at all.

All times are GMT. The time now is 07:25 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page