SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Which main jets from this site? (http://forums.sv650.org/showthread.php?t=128696)

stuballs 30-03-09 10:50 AM

Which main jets from this site?
 
Anyone know?

http://www.allensperformance.co.uk/mikjets.html

Cheers

Dappa D 30-03-09 11:23 AM

Re: Which main jets from this site?
 
for the curvy in you sig? whats in there at the moment? standard 137.5 mikuni's?

stuballs 30-03-09 11:25 AM

Re: Which main jets from this site?
 
Quote:

Originally Posted by Dappa D (Post 1843023)
for the curvy in you sig? whats in there at the moment? standard 137.5 mikuni's?


It wouldn't be for a pointy ;)

Yes standard 137.5 Mikuni's.

Dappa D 30-03-09 11:31 AM

Re: Which main jets from this site?
 
lol yea yea yea! might have been for a different bike shmart ****!!!

seriously tho i dont know....just pretending like I do!,

when i bought main jets to accommadate some bits and pieces on the bike i got from here http://stores.ebay.co.uk/Janets-Bike...QQftidZ2QQtZkm

very cheap, next day delivery and anything not listed she can get within a couple of days.....sorry dude dont know looking at that allens site :-(

stuballs 30-03-09 11:41 AM

Re: Which main jets from this site?
 
No worries. Sorry for being a smart-****! Might have a proper look at that ebay site later. The jets in that link fit the SV? What bits and pieces did you have and what jets did you use?

Dappa D 30-03-09 12:53 PM

Re: Which main jets from this site?
 
ive not got them any more but i had a bmc race rs filter so needed to jet to suit that, didnt get it dynod and set up exactly right but i went with 155 mikunis and they were close enough for me!

also raised the tank by 10mm using some door stops and pulled out the sound deadening foam from under the tank.

the jets in the link are same make as standard ones in the sv, why are you rejetting out of interest? doing any engine/exhaust work?

stuballs 30-03-09 01:29 PM

Re: Which main jets from this site?
 
I am considering fitting a BMC Race filter (not RS). Have an end can. Was thinking of going to 142.5 or 145. Just considering it at this stage.

Dappa D 30-03-09 01:38 PM

Re: Which main jets from this site?
 
i see i see....i bought a few different sizes from that ebay shop so could try different ones and see what was best (turns out the first ones i put in i was happy with) as they are cheap enough....

ill put my guess in....142.5!

stuballs 30-03-09 01:40 PM

Re: Which main jets from this site?
 
The great thing about twins (as opposed to 4 pots) is that jets are cheaper cos you need half as many!

yorkie_chris 30-03-09 03:08 PM

Re: Which main jets from this site?
 
N102221-xxx as far as I remember. Best to pull a jet out and have a measure though, I'm not at home so can't check on my spare ones sorry.

stuballs 30-03-09 04:23 PM

Re: Which main jets from this site?
 
Quote:

Originally Posted by yorkie_chris (Post 1843557)
N102221-xxx as far as I remember. Best to pull a jet out and have a measure though, I'm not at home so can't check on my spare ones sorry.

They look about right. I don't need to order them just let so if you could check your spares I'd be very grateful.

Cheers

Stu

boo86 04-04-09 09:00 AM

Re: Which main jets from this site?
 
I was running my race bike on 152.5 mikunis with a de-snorkeled BMC road and it was a little lean. I'd go for 160s. I'm running a full micron system on mine so if you've got the standard exhaust I'd go for 152.5s.
I'm now up to 165 mikunis and a BMC race RS (open top one) an 8" can with a full micron system and 17mm tank risers, 3 mm slide hole and a raft of other tweaks. Goes like stink now !!

yorkie_chris 04-04-09 09:56 AM

Re: Which main jets from this site?
 
Quote:

Originally Posted by boo86 (Post 1851411)
I'm now up to 165 mikunis and a BMC race RS (open top one) an 8" can with a full micron system and 17mm tank risers, 3 mm slide hole and a raft of other tweaks. Goes like stink now !!

Snap

My slide hole isnt drilled out so far though


All times are GMT. The time now is 07:08 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.