Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Having a clearout,

This is surplus - MC is in good working order with no marks. Comes complete with reservoir, reservoir mounting bracket and good brake lever. Also comes with a bent lever that you are welcome to throw away or keep in the toolbox as a 'get outta trouble' spare.

Looking for [PRICE=£65] posted 1st class recorded.

Will work with a multitude of other bikes also! Perhaps the whole GSXR family. Came from a 7K mile GSXR 600 K5 but would work with the SV650 no problems, have one on mine!

Got it with me today so can post today so you could have it tomorrow/Thursday.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Nice Gixerbot friendly ad ;) ;)
So how much of an upgrade would this be? do you think it would fit a G1 ZX6R?
I'm guessing Clip ons are std 22mm size? & this is everything up to the brake lines? And there's a brake light switch connector? :???:

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

I tried on my 636, it did fit on the bar but i could not get the stock lines to fit as they were designed to fit on the end of a normal MC, mabey the G model lines are longer as the bars are on top of the yokes unlike the J & 636.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

I don't have stock lines, i have braided, but I would guess they are stock length.
where do the lines attach? i can see the bleed nipple on top but nowhere that thelines attach? is it underneath?
And what about how much of an upgrade this would be? is it a matter of matching a radial lever to radial calipers? :???: or each of those would be better than non radial?
Cheers :)

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Its underneath, so theywould have to do a 90 deg bend.

I dont know how they work on 6pots, ive got them on GSXR 4pots on the SV and its way more than enough, sharp, i like it.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Radial M/C works fine with axial calipers.

Radial M/C is more rigid.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

the problem is not if its radial or standard calipers, its 6pot vs 4pot calipers, whats the diffrence

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Thanks

:-k

:)

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Piston area is only difference that matters. More pistons but same size MC = more advantage. But go too far and you won't move enough fluid to get the pistons to contact the disc.

Try it, I think it will work if the brake lines are ok.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

So it's moving more fluid for the same movement? i.e. moving the brake pads more.

Why would it not work just the same on 6 pots?

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

because there are more pistons to move, 6 pistons vs 4 pistons, i found that the standard mc on the 636 was always a lil soft on the 6pots vs when i used to have a stock mc on 4pots on the SV

try it, nothing to loose and if you dont like it you can allways fit the MC to your SV or sell it again for the same money as you bought it.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

It will, just you may get more lever travel. Are your calipers same as 'busa?

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

yes

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

For those same MC has been found to work, lots of TLR people swap from those to 4 pots without incident. This says to me they are similar.

(It is possible that the 6 pots have smaller pistons, meaning the difference in area is not so great)

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Morning Stu, TSM and Yorkie!!

I've had these on the Tokico 6 pots and to be honest - I think they are better suited to 4 pots!

On 4pot radial or axial these work best.

For an upgrade master cylinder for the 6pots - your best off with a brembo race MC - probably a 19x20,

But like TSM said, you could always buy and try...

P.s. - the 6 pots do have smaller pistons... (at least two different sizes in the same half of the caliper!

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

If Stu doesn't have it, I will - for my K4 GSXR tokico four pots.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

There are diffrent models of 6pots on the ZX6, my 636 had differential pistons but i think the ones pre did not.

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Don't let me hold you back :) enjoy!

Re: Suzuki GSXR K5 600 Radial Master Cylinder + Lever
 

Sweet!

Ter, do you ever come to soho?