SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - front wheel (http://forums.sv650.org/showthread.php?t=102906)

twonky

17-01-08 12:40 AM

front wheel

Does anyone know if a front wheel off a carbed sv 650 fit an injected model?I have been told if i change the bearings and wheel spacer it willl fit.

zadar

17-01-08 05:04 AM

Re: front wheel

Quote:

Originally Posted by twonky (Post 1388595)

Does anyone know if a front wheel off a carbed sv 650 fit an injected model?I have been told if i change the bearings and wheel spacer it willl fit.

you dont need to change bearings,axles are same size.
however you need new spacer on right side and curvy axle to use it.speedo is same on both.

jambo

17-01-08 05:31 PM

Re: front wheel

I can't remember if there's an issue with the discs. I know the 99-02 front discs are dished, and the 2003+ discs are not, but I'm not sure if the hubs are the same diameter etc...

Stu	17-01-08 05:43 PM

Re: front wheel

Northwind said the bearings are different IIRC.

Why not sell your curvy one to Big Ape & buy my pointy one?
Jobs a good'un!

zadar

17-01-08 06:27 PM

Re: front wheel

bearing ID is same,spacing between rotors is same even tough curvy ones are dished.
curvy is narrower at hub and reason you need yo use curvy axle.pointy has axle that has step on it instead spacer.
Twin Works Factory sells spacer kit for this application but they are in USA.

All times are GMT. The time now is 11:42 AM.