clutch sensor
 

ive just tried starting the bike, i turn on the ignition.. the system primes in nuetral but wont do anything when the start button is pressed.. except for dim the lights.. i have checked the fuses which are fine.. ive cheked the imobaliser (as the machine primes it wouldnt be that because if it was the imobiliser.. it wouldnt prime at all..) i put it in gear and held the clutch in and the system then wont prime.. which leads me to believe its the clutch in sensor.. any ideas where to find/check this???

thanks in advsnce

LyleJ

Re: clutch sensor!!
 

Check under the clutch lever first to make sure it isn't the connector which has dropped out.

Re: clutch sensor!!
 

nope not that, can i have your mobile dave? and if you have time can lend me hand??

Re: clutch sensor!!
 

If it was the clutch sensor then the lights wouldn't dim when you pressed the starter button; because if the clutch switch wasn't working then when you press the button you aren't applying power to anything. I suspect a low battery voltage or duff battery - enough to prime but not turn the starter.

Re: clutch sensor!!
 

yeah maybe.. although i charged overnight with an optimate??