Fairing lowers bracket
 

Hi all

I'm after a fairing lowers bracket for my thou so I can have my fairings on for my track day Sat 20/06. I presuming the 6 1/2 is the same as the thou even though the fairings are different but I'm sure you guys will let me know. PM if you can help.

Thanks in advance Alan :)

Re: Fairing lowers bracket
 

Which bracket, the arched one that is replaced by crash bungs (if you get them) or one of the 'u' shaped brackets that bolt to the rad?

Re: Fairing lowers bracket
 

As far as I'm aware, the though fairings will not fir. Although they look the same, the engine is bigger and the moun ting points aren't the same. 650 bracketry will only fit on the 650 and only mount 650 fairings and the same goes for the thou.

Sorry but I hope this helps.

Regards

Re: Fairing lowers bracket
 

It's this one. I thought it may be the same bracket with the holes just in a different place on the 650 to compensate.

http://forums.sv650.org/attachment.p...1&d=1244917254

Re: Fairing lowers bracket
 

Pm me your address and ill take the 2 off my 650 before its collected on monday and pop them in the post.

I know the engine is bigger and the fairings are different...but you may be able to do something with them.

Rob

Re: Fairing lowers bracket
 

just get it welded.. they are 90 degree. any welder should be able to straighten then weld it back together for you...

Re: Fairing lowers bracket
 

I am having mine welded but I don't see the guy until tonight and he said it didn't go back to 90 deg when he closed up the break. I'm expecting to have to tweek it again with heat when welded and just wanted something to back it up in the meantime. Speedplay is kindly sending me 650 items to try and if the are different they will be available for the next guy who needs them FOC.

Thanks for the help guys.

Alan