![]() |
Rear brake pins - where from online?
hello all
in the middle of doing the rear caliper on the bike but need new rear pins as i cant get the old ones out. cheers Ricky 2001 sv650sk1 curvy |
Re: rear brake pins?? where from online??
Wemoto
|
Re: rear brake pins?? where from online??
Or tasty nuts I believe do titanium ones[1]. :)
Druid [1] Although I believe Ti is even worse for galling than Al, doesn't rust though. |
Re: rear brake pins?? where from online??
;-) I sheared one off trying to get it out and then tried to drill it and missed, end of rear caliper lol, before buying the new ones just see if you can get them out without damaging other things first.
|
Re: rear brake pins?? where from online??
well 5hort5 is going to link you to his brake caliper thread so you know what NOT to do in this situation!
|
Re: rear brake pins?? where from online??
haha yer read that thread, i have snapped both pins, one on the tip and that one come out in a vise the other one snappe in the vise with about 4mm on the end
ended up drilling a small hole in the back and hammer it out so deffo need 2 new pins now pmsl |
Re: rear brake pins?? where from online??
Here you go:
http://forums.sv650.org/showthread.php?t=145226 me and my muppet moment (one of just a few recently tbh) |
Re: rear brake pins?? where from online??
Yer sounds about the same as mine but I thought it would be a good idea to drill it from the front, bad idea now looking back on it, I should have measured it on the back and drilled there as the metal is softer. Having said that I'm getting a fully serviced set from husky for 25 quid and new pins will cost you 8.78 from wemoto ;-)
|
Re: rear brake pins?? where from online??
yer you are right funny you say that tho as thats the same pin that snapped at that size lol
any one priced up the pins at a local dealer?? |
Re: rear brake pins?? where from online??
So are you going to clean up the good pin and reuse it, if so I have another - good (in need of a clean and rub down) pin, the one that didn't brake you can have if you just want a free option
|
All times are GMT. The time now is 07:04 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.