SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Mini-Twins (http://forums.sv650.org/forumdisplay.php?f=151)
-   -   just started minitwin with NEMCRC and Derby Phoenix (http://forums.sv650.org/showthread.php?t=151092)

mike_red2uk 04-05-10 08:58 PM

just started minitwin with NEMCRC and Derby Phoenix
 
Finally made the step from trackdays to racing with my 2000 curvy,
Done croft and cadwell just so far !
had misfiring problems both times, poorly bike off the get dyno'd and tuned properly, was running 1st at Cadwell, 4 laps in misfiring started and finished 14th GUTTED !!!!!
looking forward to 2010 fianances permitting !!!


cheers
mike #54
(and my bike trigger)

Berlin 06-05-10 02:01 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
You going to be at East Fortune on the 15th 16th mike?

C

mike_red2uk 06-05-10 07:07 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
only of i can book me bike into a dyno, i divibt want to waste a nother regs cost
the tuner recommended by me mate peter minns, a lad at malton is fully booked till the TT,
ganna try ringing the lad at PC performance at ashington,
what you riding pal ?

Tim in Belgium 06-05-10 07:45 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
Is it a loose coil connection causing your misfiring issues?

mike_red2uk 06-05-10 08:25 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
no tried all that !!!!
cheers

Berlin 07-05-10 07:37 AM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
I'm on A 600 Mike. Number 33

Even though a guy I asked said he wouldn't take his wheelbarrow to him, there's also the guy at Northallerton.

Have you changed the plugs? Checked the coils and leads for spark leakage? A high speed misfire could also be fuel starvation. Check there are no kinks in the fuel lines. If there are any filters in your fuel lines try running it without them to see if they are causing too much restriction.

Doesn't sound like the carbs but I'd clean them out (including all the jets) and check they go back on without any air leaks in the rubbers.

Good luck sorting it!

C

mike_red2uk 07-05-10 09:56 AM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
who the dyno lad at ashington ????
We'll im having a good strip down this weekend (the bike not me !)
then trusting wiv the dyno run and my normal cheeky midday run upto towlaw all is good with the SV then im east fortune bound,
im sure not to break any records tho as ive never ridden it b4 and there isnt a test day,
even if the bike dont run i'll prop pop up to see people and watch, so if i find you i'll say hi pal .

I'll post how the bike gans

mike

mike_red2uk 08-05-10 01:23 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
right just had bike on dyno. much to my surprise it was running lean, weve took the factory pro 140 jets out and put in the 145, gave a lovely smooth curve upto 68bhp at the wheel. flattened off at high revs so biggers jets would get more BHP.
Im ordering 147.25 and 150, mebbies even 152.25 jets from America,
So the bike good to go for eastfortune this next weekend, then i'll fit the biggers jets and dyno it again later in the year.
by the way when it was missfiring it was making 55bhp !!!!!! and i was wining on that at Cadwell !!!!!!!!

Berlin 08-05-10 05:23 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
You're ordering jets from the US?

Can't you get them here?

Glad you got it sorted :)

mike_red2uk 08-05-10 05:45 PM

Re: just started minitwin with NEMCRC and Derby Phoenix
 
was going for the factory pro ones, but as yorkie said im gettin same here


All times are GMT. The time now is 10:04 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.