SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   rear brake master cylinder upgrade, what fits? (http://forums.sv650.org/showthread.php?t=158827)

stamasman 17-10-10 07:27 PM

rear brake master cylinder upgrade, what fits?
 
want to upgrade my rear mastercylinder any1 know what would be a good option,what would fit etc.

flymo 18-10-10 09:14 AM

Re: rear brake master cylinder upgrade, what fits?
 
Quote:

Originally Posted by stamasman (Post 2397602)
want to upgrade my rear mastercylinder any1 know what would be a good option,what would fit etc.

The stock SV master cylinder is more than up to the job

andrewsmith 18-10-10 10:41 AM

Re: rear brake master cylinder upgrade, what fits?
 
Quote:

Originally Posted by flymo (Post 2398132)
The stock SV master cylinder is more than up to the job

+1

if the brakes are feeling carp a quick clean and fresh fluid may cure it.

if not a master cylinder rebuild kit is less than £30 (for a curvy) on wemoto.com

Swin 18-10-10 10:45 AM

Re: rear brake master cylinder upgrade, what fits?
 
I found on my bandit that braided hoses improved the brakes no end, that's my project next spring with this bike

barwel1992 18-10-10 10:57 AM

Re: rear brake master cylinder upgrade, what fits?
 
i have to say my rear brake is rubbish, thats with new seals, braided hoses, HH pads, fresh fluid and no air in it at all

flymo 18-10-10 10:59 AM

Re: rear brake master cylinder upgrade, what fits?
 
Quote:

Originally Posted by barwel1992 (Post 2398250)
i have to say my rear brake is rubbish, thats with new seals, braided hoses, HH pads, fresh fluid and no air in it at all

I would doubt that bit, the SV rear brakes are good enough to lock the rear wheel into a buttock clenching slide when working properly

barwel1992 18-10-10 11:00 AM

Re: rear brake master cylinder upgrade, what fits?
 
its been bled no end of times (off the bike) and i just cant get it to work, i can lock up easier using engine braking.

flymo 18-10-10 11:04 AM

Re: rear brake master cylinder upgrade, what fits?
 
assuming the pads are not glazed, not contaminated and have a good mating surface with the disc (not pressing against a banana shaped braking surface) then its almost certainly air in the system or something wrong with the MC seal/bore.

barwel1992 18-10-10 11:06 AM

Re: rear brake master cylinder upgrade, what fits?
 
hmm, if its wet tomorrow i will strip it all down again and see whats hapening

yorkie_chris 18-10-10 11:19 AM

Re: rear brake master cylinder upgrade, what fits?
 
Quote:

Originally Posted by stamasman (Post 2397602)
want to upgrade my rear mastercylinder any1 know what would be a good option,what would fit etc.

No point doing it TBH

But if you want to there is neat one from CRF450 or something (IIRC) that fits, shiny with integrated reservoir.

I'm not 100% on this so you'd have to find one to check hole spacings and such.


All times are GMT. The time now is 11:14 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.