Scottoiler vacuum feed, where from?
 

Just about to get a Scottoiler to go on the SV. Could someone confirm (or otherwise) that T-ing into the vaccuum feed for the fuel tap will have no effect on the tap. I assume the tap will function normally as there will still be a vacuum there.

Re: Scottoiler vacuum feed
 

Ive seen others do that without issue

Re: Scottoiler vacuum feed
 

Excellent. Thanks for that.

Re: Scottoiler vacuum feed
 

Yes it's fine.

BTW the normal tee supplied is too small for the vacuum tubing used, you need something to fill in the gap, or a bigger tee.

Re: Scottoiler vacuum feed, where from?
 

This is a 2nd hand one Chris, originally bought for a Triumph so I'd been warned already that the t-piece is the wrong size. Thanks for the heads up anyway.

If u need a new piece scootolier will send it to u for free

Re: Scottoiler vacuum feed, where from?
 

Now that's handy to know - thanks for that Nick.

Re: Scottoiler vacuum feed, where from?
 

Go to the Scottoiler website and download the installation guide. http://www.scottoiler.com/uk/installation-guides.html
Worked for me.

Re: Scottoiler vacuum feed, where from?
 

All fitted and done - carbs balanced too. The carbs were way out, it feels like a different bike now. It pulls cleanly from ludicrously low rpm and there's no more of the popping and f@rting from it on a steady throttle opening. I fitted the longer piece of hose to the front vacuum spigot to make balancing an easier job next time round.

Scottoiler is in place and I'll just need to spend a while adjusting the flow rate over the next few days.

Re: Scottoiler vacuum feed, where from?
 

Hi Gary

I'm glad you got it all sorted - did the bigger T connector fit then?

Denis