Indicator wiring error?
 

Just a quick one.. I hope

Fitted new indicators front and rear and now they're flashing double speed although I'm certain they're wired correctly.
Flash normally on hazard but double on indicator. All bulbs are ok and fuses too.

Someone please correct my simplistic stupidity for me..

Thanks boffins'

Tom..

Re: Indicator wiring fook-up?
 

LED indicators?
If yes then you need some resistors.

If not then the wattage on the bulbs are wrong and you also needresistors as well or change the bulbs to the correct wattage specified in the SV manual or look at the old bulbs.

Re: Indicator wiring fook-up?
 

This seems to be the latest quick fix for LED indicators, a better option than individual resistors, especially if you've got front and rear

http://www.ebay.co.uk/itm/4002501242...ht_1350wt_1139

Plug & play - simples

Re: Indicator wiring fook-up?
 

yup thats better and you wont end up having to cut/splice anything or worry about resistors running very hot

Re: Indicator wiring fook-up?
 

Cheers folks,
And wiring this in will cure the problem all round with having led front and back?

Re: Indicator wiring fook-up?
 

Yep, just unplug the standard Suzuki relay and plug this in its place, its that simple

Re: Indicator wiring fook-up?
 

Thanks a lot. Much appreciated!

Re: Indicator wiring error?
 

I have an LED relay going spare, yours for a fiver via paypal, never been used as it doesn't work on my Triumph.