K3 Radiator, engine bolt & original bar ends.
 

Looking for a radiator for a faired K, an engine mount bolt and original bar ends.

This happend to mine.
http://i.imgur.com/USjDMl.jpg

Re: K3 Radiator, engine bolt & original bar ends.
 

Good condition rads usually go for £75-£100 on here but rarely come up. The cheapest I've found new are here: http://www.aaronradiator.co.uk/catal...FUPHtAodwx8ArQ
Delkavic also sell K3 (faired) rads for £150 on ebay.

Don't overook the possibility of getting yours repaired. Take your rad, or the whole bike to a local radiator manufacturer and let them have a look, got mine repaired for £35+vat, mine was sligtly twisted and the end panel and been pushed in.

A set of R&G crash bungs come with that engine bolt if your interested!

Regards

Re: K3 Radiator, engine bolt & original bar ends.
 

I have crash bungs on, this bolt comes from near the bottom, near the side stand. Not sure if I can just get one from B&Q or something.

Been looking at the rads there, is there 10% extra on top of that for org members?

Thought I'd try getting a used one before getting a new one. I'm skint atm, not sure what place could have a go at repairing mine.

Re: K3 Radiator, engine bolt & original bar ends.
 

Call a few breakers. These bolts rarely get touched and so rarely get broken. I doubt it's something they'd keep but if they are currently breaking one it should be quite cheap. Could also try seeing how much they are new (visit your local Suzuki dealer for them to bring it up on screen). Don't use one from a builders merchant as the properties wont be right for use on an engine mount in a motorcycle!

Why would they add 10% on???

If you type "radiators" and your location into google, then all you need to is email or phone the radiator repairers/manufacturers local to you and see what they say.

Regards

Re: K3 Radiator, engine bolt & original bar ends.
 

http://www.sv650.org/adverts1/aaron/aaron%20rads.htm

I ment discount. Happen to know if that bolt is the same on a curvy? Local breakers only has a curvy atm.

Re: K3 Radiator, engine bolt & original bar ends.
 

Couldn't tell you for sure but I suspect they are different. Not sure about discount as they are already on sale but it never hurts to ask!

Regards

Re: K3 Radiator, engine bolt & original bar ends.
 

Rad and bolt sourced. Thanks squirrel_hunter. Just the bar ends to go, hopefully they will cure the numb arm/vibration problem.