![]() |
Pillion peg spacer and bolt
1 Attachment(s)
Anyone got a spare of the above I could buy? Attached a pic just to clarify
|
Re: Pillion peg spacer and bolt
Bump.
|
Re: Pillion peg spacer and bolt
Looks like an aftermarket one, supplied with the exhaust headers mate.
I have similar spacers with my Micron headers. You could get some tubing & long enough bolts to make up a similar spacer from somewhere like B&Q Unless you know who made the exhaust? |
Re: Pillion peg spacer and bolt
Yeah it's a scorpion exhaust but unfortunately it only had one spacer with the pegs. Phoned the guys I bought it from and they don't know where it is (fantastic).
Any idea where to look for the tubing? I haven't had any look at department stores, nothing is thick enough. |
Re: Pillion peg spacer and bolt
B&Q?
If not a proper Ironmongers Ebay? |
Re: Pillion peg spacer and bolt
|
Re: Pillion peg spacer and bolt
1 Attachment(s)
Unfortunately not, it needs to be 8mm internal diameter and 20mm external diameter. Been trying to find something for ages :(
|
Re: Pillion peg spacer and bolt
Probably a daft reply on my part but have you tried contacting scorpion to see what they can do?
|
Re: Pillion peg spacer and bolt
Quote:
Its a simple job for an apprentice :p |
Re: Pillion peg spacer and bolt
Can't be that hard
http://www.steelexpress.co.uk/ or this then just drill out the center or this 16mm OD x 10mm ID - is stick a washer both side to make it 20mm ?? |
All times are GMT. The time now is 06:09 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.