gsxr 750 front end swap curvy questions
 

hey guys
I have wanted to a fork swap on my sv for a while since I swapped out my forks for the later model adjustable ones after I was nocked off last year.
my local breakers have a gsxr 750 k4 I think- (could be wrong ive not seen it) and they don't want too much for the front end.
so my questions are:
does it matter what year gsxr they come from?


can i use the gsxr yokes?

is the stem and steering bearings transferable or will I have to make up shims to make it fit?

how easy is it to wire in a new sensor on the new front wheel for the speedo and calibrate?


any help would be awesome guys! cheers Tom :)
http://i1186.photobucket.com/albums/...ps3fc16f7b.jpg
i enjoyed playing with the settings on these when i got them but would still like the upgrade

Re: gsxr 750 front end swap curvy questions
 

Seek and you shall find

http://forums.sv650.org/showthread.p...gsxr+fork+swap

Most of the info is here

Re: gsxr 750 front end swap curvy questions
 

you are a lamb xxx thank you <3

Re: gsxr 750 front end swap curvy questions
 

If you're doing the k4 swap, then you'll need one of these for the top yoke bearing

http://forums.sv650.org/showthread.p...pecial+bearing

Its not that hard to do, and probably the speedo sensor is the hardest part to get right

Here's the part you need for the sensor

http://www.digikey.co.uk/product-det...H398-ND/280932