LED indicators
 

HI , I have a 2014 SV650 and I've been told that you can fit LED indicators to it without adding resistors or a new relay? .. is this correct are they just plug and play ?

Thanks

Re: LED indicators
 

unless suzuki have changed the relay (very much doubt) then i dont think so.

Re: LED indicators
 

so all i need is the relay and the indicators ? and is the relay just a plug in

Re: LED indicators
 

Yes, you can get a relay that just replaces the oem that works with LEDs. Look on ebay, plenty of choice, but go for a uk seller.

My oxford nano led's come with resistor, and are straightforward to fit, so i didn't need a relay.

Just remember that most led's come with bullet connectors and you will need 4 adaptors to convert bullet to suzuki connectors, saves cutting the wiring.

Also if yours is a faired model then you will also need some Indy Spacers to fit the LEDs in the fairing

Re: LED indicators
 

Sometimes the resistors don't work as supplied.

Also remember that the resistors turn the surplus electrical energy into thermal (heat) energy, so locate them well away from plastics or anything else that may be affected by it, they can become hot enough to melt plastic easy.

That said, they look well smart and bright and they go better with the led tail-light.

Also read what maviczap also says about the spacers and connectors, before you start.

Re: LED indicators
 

I suspect the cheapo ones don't work properly, my Oxford Nano's are well made & the quality is very good. They are a bit more expensive, but they've never given me any problems

Re: LED indicators
 

i`ve bought the relay and indicators , do i need spacers for the front and the back ?

Re: LED indicators
 

yes.

Re: LED indicators
 

For the front yes, and only yes if you've still got the standard rear mudguard

Mines got a Powerbronze undertray & a different number plate hanger, so I didn't need spacers for the rear

Re: LED indicators
 

Standard at the moment .. Thanks guys .