Banjo Switch Size
 

Neeed Help on knowing which size banjo switch needed for my SV650s K9 model (09)

1mm or 1.25mm???

Looked everywhere and cant find any information on it.

Re: Banjo Switch Size
 

Not sure what you mean by banjo switch.

Re: Banjo Switch Size
 

For the rear brake switch. Instead of coil and spring. It’s a pressure switch I think for the brake light.

If that helps at all.

Re: Banjo Switch Size
 

My bike was older and I had the old style switch, the spring and plunger type. I'm sure someone on here with a later model can help.

Sent from my Moto G (5) using Tapatalk

Re: Banjo Switch Size
 

Master cylinders F+R are 1.0 the calipers are 1.25 both M10

Re: Banjo Switch Size
 

Is it non standard because the parts fiche shows it as a mechanical switch:
https://www.fowlersparts.co.uk/parts...s-sv650a-k8-k9
(part #17)


My 2016 AL7 also has a mechanical switch

Re: Banjo Switch Size
 

A pressure switch like that would be fairly common on offroad stuff or custom builds. It's definitely not standard, but also why not?

Would be cheaper than replacing the M/C