HyperPro Rear Spring SOLD
 

HyperPro rear spring to fit Curvy rear shock. 195mm length, min ID 48.5mm, max ID 52mm.

I believe it's a non-linear spring as the coil spacing is not constant, & it gives a more compliant ride than the Suzuki standard O/E rear.

I bought it from a forum member a year or so ago, got it blasted & powdercoated in bright yellow....... & then went for a GSXR shock instead. :lol:
The HyperPro doesn't fit the GSXR. #-o
Don't know if it'll fit a Pointy's shock.

£12 plus £4 or so for carriage.

Was the coil the correct spring rate for curvey SVs?

Do you know if it will fit a Penske shock?

No idea. You'll have to measure the shock body diameter with a vernier or similar, check the length of spring it requires.....basically compare it with a standard SV shock/spring

Darn, nop wont fit. Spring needs to be 2.25in. Thanks anyway.

Got a selection of Hypercoil springs which are the right size for a Penske shock. I think lowest is 550 pounds/inch and highest is 700 pounds/inch

Cheers
Ben

Bump

Bump