SV650.org - SV650 & Gladius 650 Forum - Fitting a Scottoiler on a K3 model

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Fitting a Scottoiler on a K3 model (http://forums.sv650.org/showthread.php?t=72125)

Fitting a Scottoiler on a K3 model

Have been browsing through but can't find much info on fitting one on a K3 or later model.

If anyone has pictures, and any advice on placment and how to attached the pipes to the swing arm so they are secure and hidden/not on the bottom of the arm as I have a stand to lift the bike on the swing arm and would crush the pipe otherwise.

On thing I could really do with help on is exactly where to find the vacum pipe on the engine as the instructions on the Scottoiler site are a little vague and the pictures very small.

Cheers for your help.[/b]

two little rubber caps, one either side of the throttle body are what your looking for. Either one can be use. Use plastic cable ties to attach the tube to the swingarm and bring it up to the top or side so you don't crush it. I have to say it does spoil the look of the swing arm a little, but I'd say it's worth it!