Fitting a Scottoiler on a K3 model - SV650.org

30-05-06, 04:22 PM

Have been browsing through but can't find much info on fitting one on a K3 or later model.

If anyone has pictures, and any advice on placment and how to attached the pipes to the swing arm so they are secure and hidden/not on the bottom of the arm as I have a stand to lift the bike on the swing arm and would crush the pipe otherwise.

On thing I could really do with help on is exactly where to find the vacum pipe on the engine as the instructions on the Scottoiler site are a little vague and the pictures very small.

Cheers for your help.[/b]

Big Bad Al · 30-05-06, 07:36 PM

two little rubber caps, one either side of the throttle body are what your looking for. Either one can be use. Use plastic cable ties to attach the tube to the swingarm and bring it up to the top or side so you don't crush it. I have to say it does spoil the look of the swing arm a little, but I'd say it's worth it!

30-05-06, 09:46 PM

This might of some help to you

http://www.scottoiler.com/userfiles/...%20SV1000S.pdf

30-05-06, 04:22 PM	#1
robertwo Guest Posts: n/a	Fitting a Scottoiler on a K3 model Have been browsing through but can't find much info on fitting one on a K3 or later model. If anyone has pictures, and any advice on placment and how to attached the pipes to the swing arm so they are secure and hidden/not on the bottom of the arm as I have a stand to lift the bike on the swing arm and would crush the pipe otherwise. On thing I could really do with help on is exactly where to find the vacum pipe on the engine as the instructions on the Scottoiler site are a little vague and the pictures very small. Cheers for your help.[/b]

30-05-06, 07:36 PM	#2
Big Bad Al Member Join Date: Jul 2004 Location: West London Posts: 188	two little rubber caps, one either side of the throttle body are what your looking for. Either one can be use. Use plastic cable ties to attach the tube to the swingarm and bring it up to the top or side so you don't crush it. I have to say it does spoil the look of the swing arm a little, but I'd say it's worth it! __________________ SFV650 in black with Evotech tailtidy, R&G Aeros and Heated Grips, Puig fly screen, Pipe Werx GP style race exhaust. Whoop! Previously.... Black SVS - DHM's Heated Grips Airblade Iridium Double Bubble Screen Beowulf end can and Evotech tailtidy. 3/7/2004 - 26/6/2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scottoiler Fitting K9	TheRamJam	SV Talk, Tuning & Tweaking	14	09-06-09 05:11 PM
Fitting a Scottoiler	FishyMug	SV Talk, Tuning & Tweaking	4	06-02-08 05:12 PM
Fitting Scottoiler	plowsie	SV Talk, Tuning & Tweaking	32	12-06-07 06:42 PM
Fitting a scottoiler	Gazza77	SV Talk, Tuning & Tweaking	6	25-04-06 03:52 PM
Fitting a Scottoiler	Gazza77	Ancillaries	2	24-04-06 08:13 PM

30-05-06, 09:46 PM	#3
manxsv Guest Posts: n/a	This might of some help to you http://www.scottoiler.com/userfiles/...%20SV1000S.pdf