how much for a new front end?
 

how much would it or should it cost to replace the front end on my bent sv with used parts?
after a closer inspection the bottom yoke is bent so i'd need everything from the head stock forward.

See SVrash's costing sheet - looks like you get Gsxr upgrade for the same price
http://forums.sv650.org/viewtopic.ph...ght=gsxr+front

Yep, if buying used you could almost certainly do GSXR for less in fact, SV bits are in higher demand it seems. I sold my SV bits for more than I paid for my GSXR bits...

Or Motoliners to straighten everything?
If bizarrely you didn't want the upgrade

Same here!!

cheers
:D

Take a good hard look at the frame before you do it.Any distortion around the headstock and it's scrap.

My friend is selling a complete frond end complete with forks which have Ohlins springs and Emmulators fitted and wavey discs. PM me if your interested and i will find out how much.

If you go for a GSXR front end then go for the K4/K5 600/750 plonks straight in pretty much and has the radial calipers and with stock internals the forks work perfect.