SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Bike is a 05 650 race bike.Instead of the tre mod, is it possible to short gear position sensor to make bike think its in sixth gear all the time.Presumably you would lose neutral lite?
|
![]() |
![]() |
#2 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
No you fit a resistor across the wire the ECU uses.
That maintains neutral light operation. Or you could detach the sensor and find a way to hold it in 6th position... or do that by shorting inside of sensor instead of using the little pins inside the end of the selector drum... or... Nah f##k it too much work! Just use a resistor in normal TRE style it's easiest way.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Dont do it!. Your never riding the bike at 4,000rpm on track (where the retard in ignition is) and plus you WILL want the bike to run individual gear maps for better performance anyway!.
The retard is only teeny anyway and defaulting the bike to a high gear (rich) and ignition map will only loose you ALOT more than the retard looses you anyway. |
![]() |
![]() |
#4 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Rich in high gear? SV has no ram air so I wouldn't think it would make a difference?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#5 | |
Guest
Posts: n/a
|
![]() Quote:
I know the SV isnt speed restricted anyway but the guys selling the TRE's are really ripping the pee. They state it removes the speed limiter on all the late Suzuki's...BUT they havent been speed restricted since 2005 at least! The clocks just stop reading thats all. |
|
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Are you talking about a power commander remap or the stock ecu?
Last edited by twonky; 10-02-09 at 01:34 AM. Reason: rethink |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
Both methods of remapping.
I also am 99% sure a TRE is illegal in minitwins. |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
I was doing a few things on the bike today, my next job was the TRE solder in a resistor mod until my brother told me about this post... so I decided to hold off until I read it.
Now that it has been explained properly I have a spare resistor in my toolbox... |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
Thread Tools | |
|
|