SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
where is best place to get a lever asap??
also can someone tell me how to change them?? thanks! Ash |
![]() |
![]() |
#2 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
You can get them from a local dealer or from ebay (same as a gsxr srad) or you could get a MFW one from M&P for about £35
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#3 |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
![]()
Weemoto is one of the places, or sparesdirect.co.uk or com, cant remember.
Depends on what model of SV you have as how to replace them If its attached to the foot peg, then you will need to remove the whold assebly from the bike (6mm allen bolts i believe), unscrew the change rod from the lever end (Its LH thread iirc) then remove the 6mm allen bolt from the foot peg, then you can pull the old broken leve from the peg. A little wd40 will help the new lever slide on. Reassemble the unit as you took it apart, and adjust the lever to prefered height. Job done. |
![]() |
![]() |
![]() |
#4 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]() Looking at his avatar i would hazard a guess at it being a curvey S model ![]()
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#5 |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
![]()
As i dont have avatars, sigs turned on, i wouldnt know so neeeerrrrr
![]() ![]() |
![]() |
![]() |
![]() |
#6 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
Ok I'll let you off this time Viney
![]()
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#7 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Is it broken or just the toe peg that's snapped off?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#8 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
You beat me to it YC was just going to say if it's just the toe peg that's broken off to drill it and stick a bolt through
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
yeah its just the toe peg, the bike slipped from under me going round a bend at like 10mph due to wet leave and a drain, the R+G bungs done the job though but destroyed itself in the process, i just found the guide on how to drill it through, is that a good enough fix for now?? and is the disassembly still the same?
cheers |
![]() |
![]() |
#10 |
Knob faced knobster
Mega Poster
Join Date: Jan 2005
Location: Haslemere
Posts: 5,422
|
![]()
Yeah the bolt through the lever will last a fair while and dissasembly is the same although the last one i drilled it on the bike and bolted it that way
__________________
2011 Speed Triple 1050 |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to straighten a bent gear lever? (heat it up first? or what?), ---possible fix or recipe for snapped of gear lever :-) | martin_SV | SV Talk, Tuning & Tweaking | 10 | 30-07-08 08:40 PM |
K5 Pointy 650S right hand wing mirror, gear lever and clutch lever. | Bayside GTR | Stuff Wanted | 0 | 29-10-07 11:24 PM |
2 left indicators + clutch lever + gear lever for pointy k6 | enduroman | Stuff Wanted | 3 | 06-09-07 09:26 PM |
A broken Gear change lever (Mk1SV) | Viney | Stuff Wanted | 2 | 19-07-07 02:04 PM |
Gear change lever | Ward8124 | Bikes - Talk & Issues | 0 | 03-02-07 04:19 PM |