Curvy Front End Bits - SV650.org

13-05-10, 04:41 PM

Before they go on Ebay:
Left over after GSXR conversion, all good straight low mileage stuff. 2000 Curvy.

Forks had new Hagon progressive up rated springs and heavy weight oil. £85 Sold

Front wheel (few marks) Small ding £50

Front wheel spindle £10

2 front discs £50 Sold to Cammy

2 front callipers. Just before the change over, the front callipers where striped and overhauled with new seals and rubbers (genuine Suzuki parts) and pads (H&H). £50

Twin Goodridge braided hoses, bit rough and signs of rust on the hoses since being left. Goodridge have sent me a free rear replacement for the same problem, so might do the same if you asked them. £15

Front master cylinder and reservoir £25

Front brake lever £10 Sold to Cammy

Lower triple £20

Upper triple £15 Sold

Stem bearings £5

Front fender (mud guard)with pyramid fender extender in the best colour, (pearl helis red Y7M in case you didn’t know) couple light marks with fixing brackets and bolts. £25

Left clip on £15 Sold

Right clip on £15 Sold

Would prefer collection from Fordingbridge or Southampton but will post at cost, or if nice and sunny meet up somewhere.
Mike

13-05-10, 06:26 PM

How much are you looking for the brake discs thanks Cammy

13-05-10, 06:47 PM

Quote:

Originally Posted by cammy

How much are you looking for the brake discs thanks Cammy

Cammy
£50

13-05-10, 08:09 PM

I will take them and if you could let me know how much the postage will be. Will transfer the money through Pay pal if thats ok.

13-05-10, 08:14 PM

I would be interested in the brake lever on its own not the reservoir or cylinder thanks

14-05-10, 04:55 PM

Discs and front brake lever sold to Cammy. Thanks

14-05-10, 10:51 PM

Hi How much for the calipers and lines,posted to cardiff S.wales pleae.

Cheers
Lee D

Quote:

Originally Posted by shelleyamy

Discs and front brake lever sold to Cammy. Thanks

15-05-10, 07:38 AM

Quote:

Originally Posted by Davies 52

Hi How much for the calipers and lines,posted to cardiff S.wales pleae.

Cheers
Lee D

I'll go and weigh them.
Mike

15-05-10, 07:43 AM

Quote:

Originally Posted by shelleyamy

I'll go and weigh them.
Mike

Just under 3Kg, so £74 for both callipers and lines.
Mike

18-05-10, 10:38 PM

Disks came well pleased thanks

13-05-10, 04:41 PM	#1
shelleyamy Guest Posts: n/a	Curvy Front End Bits Before they go on Ebay: Left over after GSXR conversion, all good straight low mileage stuff. 2000 Curvy. Forks had new Hagon progressive up rated springs and heavy weight oil. £85 Sold Front wheel (few marks) Small ding £50 Front wheel spindle £10 2 front discs £50 Sold to Cammy 2 front callipers. Just before the change over, the front callipers where striped and overhauled with new seals and rubbers (genuine Suzuki parts) and pads (H&H). £50 Twin Goodridge braided hoses, bit rough and signs of rust on the hoses since being left. Goodridge have sent me a free rear replacement for the same problem, so might do the same if you asked them. £15 Front master cylinder and reservoir £25 Front brake lever £10 Sold to Cammy Lower triple £20 Upper triple £15 Sold Stem bearings £5 Front fender (mud guard)with pyramid fender extender in the best colour, (pearl helis red Y7M in case you didn’t know) couple light marks with fixing brackets and bolts. £25 Left clip on £15 Sold Right clip on £15 Sold Would prefer collection from Fordingbridge or Southampton but will post at cost, or if nice and sunny meet up somewhere. Mike Last edited by shelleyamy; 27-05-10 at 06:00 AM.

13-05-10, 06:26 PM	#2
cammy Guest Posts: n/a	Re: Curvy Front End Bits How much are you looking for the brake discs thanks Cammy

13-05-10, 08:09 PM	#4
cammy Guest Posts: n/a	Re: Curvy Front End Bits I will take them and if you could let me know how much the postage will be. Will transfer the money through Pay pal if thats ok.

13-05-10, 08:14 PM	#5
cammy Guest Posts: n/a	Re: Curvy Front End Bits I would be interested in the brake lever on its own not the reservoir or cylinder thanks

14-05-10, 04:55 PM	#6
shelleyamy Guest Posts: n/a	Re: Curvy Front End Bits Discs and front brake lever sold to Cammy. Thanks

18-05-10, 10:38 PM	#10
cammy Guest Posts: n/a	Re: Curvy Front End Bits Disks came well pleased thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy - Front end bits	thulfi	Stuff Wanted	0	11-03-10 04:14 PM
front end +bits for curvy	or_ghani	For Sale - SV's and SV related items	9	19-07-09 03:29 PM
Curvy bits including rearsets and GSXR750 front end	carsounds_dan	For Sale - SV's and SV related items	14	09-01-09 01:23 PM
Looking for dark yellow curvy front end bits	Skiddy	Stuff Wanted	6	07-06-07 09:57 AM
Naked Curvy front end bits	Big Daft Lad	Stuff Wanted	5	22-09-06 12:20 PM