Curvy belly-pan, How do I fit it? - SV650.org

14-09-10, 02:35 PM

Hey, Dudes and Dudettes!

I was given an aftermarket belly pan by the fella I bought me Curvy off. He didn't get to fit it as there are no brackets or bolts or bolt-holes either..

I'm wondering where to mount it and what to use. Any suggestions? I thought about them Ziplock cable ties, before anyone says that..(Joke)

It'd be nice to fit it as the front of the engine is a bit scabby..lol

Thanks in advance!!

Suskmeister...

14-09-10, 02:39 PM

assuming they're all the same method of attachment then mine was:
1 long bolt through the hollow loop on the front (bottom) of the engine
Then 2 Z shaped brackets off of either side which were bolted to the belly pan and threaded through said long bolt.
Then there was also a 3rd bracket which was straight and attached the belly pan back to where the exhaust is bracketed on just behind the brake rear set.

14-09-10, 07:06 PM

Thanks for the reply, it'll give me a clue at least!!

Geodude · 17-09-10, 10:38 AM

Any idea what make it is or do you have a pic

17-09-10, 06:21 PM

Err... It's red!! (He says, brightly.)

Not a notion mate... It's a fibreglass one, that's all I know! I'll take a photo and maybe someone will recognise it?

Thanks!

Geodude · 18-09-10, 09:22 AM

^^^ A red one ha ha i spat my tea out then

Pictures a good idea cos there are some clever peeps on here.

14-09-10, 02:35 PM	#1
Suskie Guest Posts: n/a	Curvy belly-pan, How do I fit it? Hey, Dudes and Dudettes! I was given an aftermarket belly pan by the fella I bought me Curvy off. He didn't get to fit it as there are no brackets or bolts or bolt-holes either.. I'm wondering where to mount it and what to use. Any suggestions? I thought about them Ziplock cable ties, before anyone says that..(Joke) It'd be nice to fit it as the front of the engine is a bit scabby..lol Thanks in advance!! Suskmeister...

14-09-10, 02:39 PM	#2
Owenski Guest Posts: n/a	Re: Curvy belly-pan, How do I fit it? assuming they're all the same method of attachment then mine was: 1 long bolt through the hollow loop on the front (bottom) of the engine Then 2 Z shaped brackets off of either side which were bolted to the belly pan and threaded through said long bolt. Then there was also a 3rd bracket which was straight and attached the belly pan back to where the exhaust is bracketed on just behind the brake rear set.

14-09-10, 07:06 PM	#3
Suskie Guest Posts: n/a	Re: Curvy belly-pan, How do I fit it? Thanks for the reply, it'll give me a clue at least!!

17-09-10, 10:38 AM	#4
Geodude Member Mega Poster Join Date: Jun 2009 Location: Durham Posts: 2,675	Re: Curvy belly-pan, How do I fit it? Any idea what make it is or do you have a pic __________________ Black naked 1999 sv650 which im trying to keep happy Custom paintwork *Saragon Customs* Spray painting *Electrical fault finding guide* and *Regulator rectifier test* Only a biker knows why a dog sticks his head out of a car window.

17-09-10, 06:21 PM	#5
Suskie Guest Posts: n/a	Re: Curvy belly-pan, How do I fit it? Err... It's red!! (He says, brightly.) Not a notion mate... It's a fibreglass one, that's all I know! I'll take a photo and maybe someone will recognise it? Thanks!

18-09-10, 09:22 AM	#6
Geodude Member Mega Poster Join Date: Jun 2009 Location: Durham Posts: 2,675	Re: Curvy belly-pan, How do I fit it? ^^^ A red one ha ha i spat my tea out then Pictures a good idea cos there are some clever peeps on here. __________________ Black naked 1999 sv650 which im trying to keep happy Custom paintwork *Saragon Customs* Spray painting *Electrical fault finding guide* and *Regulator rectifier test* Only a biker knows why a dog sticks his head out of a car window.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy belly pan	RedAggie03	Stuff Wanted	5	08-09-10 02:44 PM
Curvy Belly pan	allantheboss	Stuff Wanted	4	09-01-10 09:18 AM
belly pan for a curvy	skoosh	Stuff Wanted	9	25-08-08 08:23 PM
Curvy Belly Pan	Saint Matt	Stuff Wanted	0	18-11-05 11:38 PM
Belly pan for Curvy SV	gc350	Stuff Wanted	3	18-11-05 06:55 PM