Scorpion Can - is rejetting needed?/other exhaust questions. - SV650.org

01-02-11, 08:37 PM

Hi all,
Thought i'd better introduce myself plus i have a few q's.
I've just bought a 2000 sv650 nak'd as my first bike which i'm very excited about. It has a scorpian slip on can on it. Because im incredibly curious and want everything to be perfect....
Will the bike need re-jetting? Apart from sound will it make a difference when removing the baffle? eg make it more lean? Or is the rule-change a filter and can together and then it needs re-jetting?
I apologise as i can imagine this subject comes up a lot

Hope this makes sense.....
Si

01-02-11, 09:38 PM

A slip-on will be fine with stock jetting. It is only really if fitting a full system that you might consider getting it down the dyno!

dizzyblonde · 01-02-11, 10:11 PM

^^wot ee said^^ scorpion have always stated their cans didn't need rejetting. Mine never has and its been there a feckin long time

Standard air filter.

And no, removing the baffle only releases the noise, doesn't do anything other than that.

02-02-11, 10:06 AM

Ahh i see...
Thanks for your help RenascenceBlue_ and dizzyblonde.
That cleared up some doubt

I'll post pics of the bike soon.

01-02-11, 08:37 PM	#1
ibanezlynx Guest Posts: n/a	Scorpion Can - is rejetting needed?/other exhaust questions. Hi all, Thought i'd better introduce myself plus i have a few q's. I've just bought a 2000 sv650 nak'd as my first bike which i'm very excited about. It has a scorpian slip on can on it. Because im incredibly curious and want everything to be perfect.... Will the bike need re-jetting? Apart from sound will it make a difference when removing the baffle? eg make it more lean? Or is the rule-change a filter and can together and then it needs re-jetting? I apologise as i can imagine this subject comes up a lot Hope this makes sense..... Si

01-02-11, 09:38 PM	#2
RenascenceBlue_ Guest Posts: n/a	Re: Scorpion Can - is rejetting needed?/other exhaust questions. A slip-on will be fine with stock jetting. It is only really if fitting a full system that you might consider getting it down the dyno!

01-02-11, 10:11 PM	#3
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: Scorpion Can - is rejetting needed?/other exhaust questions. ^^wot ee said^^ scorpion have always stated their cans didn't need rejetting. Mine never has and its been there a feckin long time Standard air filter. And no, removing the baffle only releases the noise, doesn't do anything other than that. __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12 Last edited by dizzyblonde; 01-02-11 at 10:12 PM.

02-02-11, 10:06 AM	#4
ibanezlynx Guest Posts: n/a	Re: Scorpion Can - is rejetting needed?/other exhaust questions. Ahh i see... Thanks for your help RenascenceBlue_ and dizzyblonde. That cleared up some doubt I'll post pics of the bike soon.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Baffle for scorpion needed	keithd	Stuff Wanted	7	15-03-07 08:45 PM
rejetting SV and other questions	s02sv650s	SV Talk, Tuning & Tweaking	2	26-02-06 02:53 PM
sv650 scorpion end can help needed	johnny boy	SV Talk, Tuning & Tweaking	0	08-05-05 10:25 PM
Scorpion can help needed	rob13	SV Talk, Tuning & Tweaking	9	21-03-05 09:49 AM
Some questions about Scorpion SS Oval...	Trix	Exhausts	5	11-08-04 12:58 PM