K3 Engine fix - Rotor removal - SV650.org

muzikill · 06-02-11, 08:46 PM

Ok, i will attempt to do this at some point this week so keep your eyes on this thread!

Thanks to all the advice so far about the right tools to use as progress through this, i though i would post a nice pick of the removal 'bolt' i picked up off ebay!

06-02-11, 09:47 PM

Quote:

Originally Posted by muzikill

i though i would post a nice pick of the removal 'bolt' i picked up off ebay!

If it's the one from Boltmeup I used the same thing last week. I found it a wee bit long but it worked ok.

muzikill · 06-02-11, 09:52 PM

Yup, got it from boltmeup! - they were selling em in pairs so i have 2!

muzikill · 08-02-11, 12:52 PM

Quote:

Originally Posted by muzikill

Yup, got it from boltmeup! - they were selling em in pairs so i have 2!

I take it the rotor holding bolt is threaded 'normally' and is taken off anti clockwise ?

08-02-11, 01:32 PM

Quote:

Originally Posted by muzikill

I take it the rotor holding bolt is threaded 'normally' and is taken off anti clockwise ?

Yes, left loosey.

yorkie_chris · 08-02-11, 09:15 PM

Yes normal thread. Opposite end of crank (primary drive gear end) is a LH thread.

muzikill · 08-02-11, 09:17 PM

I suppose both bolts at either side have to unscrew in the same direction (if you know what i mean!)

ta for the advice!

muzikill · 13-02-11, 04:01 PM

Sorted pic shows final result and tools used to remove it!

Once again, thanks for the advice so far!

06-02-11, 08:46 PM	#1
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	K3 Engine fix - Rotor removal Ok, i will attempt to do this at some point this week so keep your eyes on this thread! Thanks to all the advice so far about the right tools to use as progress through this, i though i would post a nice pick of the removal 'bolt' i picked up off ebay! __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

06-02-11, 09:52 PM	#3
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: K3 Engine fix - Rotor removal Yup, got it from boltmeup! - they were selling em in pairs so i have 2! __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

08-02-11, 09:15 PM	#6
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: K3 Engine fix - Rotor removal Yes normal thread. Opposite end of crank (primary drive gear end) is a LH thread. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

08-02-11, 09:17 PM	#7
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: K3 Engine fix - Rotor removal I suppose both bolts at either side have to unscrew in the same direction (if you know what i mean!) ta for the advice! __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

13-02-11, 04:01 PM	#8
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: K3 Engine fix - Rotor removal Sorted pic shows final result and tools used to remove it! Once again, thanks for the advice so far! __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine head removal	Wideboy	Idle Banter	3	25-04-10 12:15 PM
removing the generator rotor bolt/ rotor compatibilty?	Andy Jeffries	SV Talk, Tuning & Tweaking	0	05-08-09 12:00 PM
sv650 Rotor removal tool	Richie	For Sale - SV's and SV related items	10	31-07-09 09:55 AM
Rotor removal tool	lazymanc	Pennine Massive	3	13-06-09 10:47 AM
Speedo Rotor & Engine coolant leak	Nitzer	SV Talk, Tuning & Tweaking	2	02-01-07 09:20 PM