Re: Anyone after a winter project ??

Hiya peeps..

I have decided to sell my GSXR Slingshot project (due to buying an GSXR k8 - unexpectedly)

It is a 1991 H Reg GSXR 750 "Slingshot" that has been streetfightered...

It comes with the following....
Front End...
*Wheel / discs / spindle & speedo drive. There is a trye on it but it isn`t useable (good enough for a rolling chassis)
*Mudguard & metal bracket
*USD Forks - had the seals / new oil done
*Billet thug yokes (cost me £425 approx alone)
*Original yokes - lockstops ground off -
*Calipers x 2
*triumph fat bar risers (£50)
*Gold alloy fat bars (renthal style but not renthal)
* Clip ons
*91 GSXR Switchgear
*Acewell billet alloy speedo (with all the lights / fuel guage etc built in) - This is a BILLET ALLOY bodied one & not the resin one (£180 approx)
*Front light (bit gammy but usuable) the guy before me had it on the bike and was using it.
*Billet alloy levers in black with m/cylinder (£130).

*Frame
*Tank
*Seat unit
*Belly pan
*Engine mounts
*Streetfighter Bling alloy Oil Cooler (£250)
* Engine With original oil cooler / Starter / Alternator? (supposedly has 19k on, it looks clean enough)
*Original airbox

*3 x swing arms
- WN Series Braced @ the top
- Shortened original arm with knuckle (From the original 750)
- standard original arm (from 1100 - fitted to bike with 1100 knuckle)

*GSXR k8 shock (fitted to bike,top mount bracket has been modified so it fits)
*Original shock
*Rear 5.5 wheel (from an 1100)
*Sprocket / sprocket carrier
*Spindle
*Rear caliper / Caliper hanger
*Rear tyre (not useable but good enough for a rolling chassis)

Plus a few other odd`s and sod`s I`m sure like.....
*Number plate bracket
*Stainless bolts (not enough for the build)
*Rear LED mini Brakelight
*Battery box - trimmed up to where I was going to fit it in the tail
*polished & black sprocket cover

If anyone is genuinely interested pm me with your email and I can send you pic`s of the individual parts, I`ve included a few pics so you get the general idea of what it will look like.

The items in red ARE BRAND NEW.

So Far the project owe`s me about £1600 - £1800 approx

So am gonna put it up for £1450 OVNO....

Dammit ! Pic`s haven`t uploaded - will sort some thing out...

Some pic`s......


http://s1119.photobucket.com/albums/k622/whyte25/

[maviczap]

An alternative is to offer the complete front end for transplant onto a Curvy SV, as the steering head bearings are the same.

Thats what I've got on mine, but with a special one off spindle to use the Sv front wheel.

Your billet yokes look well tasty

I was thinking that, but if i don`t sell it all in 1 go i think i`ll wanna buy bits for it and finish it as it will be in my lving room Haunting me..

I can give you the guys details for the yokes if you wish? I had to wait about 4 weeks for them - but worth it.

[maviczap]

Originally Posted by Whyte25

I can give you the guys details for the yokes if you wish? I had to wait about 4 weeks for them - but worth it.

Yes, so long as its not Matt Yokes, never got mine. : smt068

I only want a top yoke, that shouldn't be a problem

I`ve heard a fair bit about matt`s yokes (none good)...

The guy`s website add is: www.billetbikebits.com co name is Martin CNC and his mobile number is: 07793677736 - Martin.

\m/

[maviczap]

Thanks, think I have found it before

Been having a think... I will sell the front end separately BUT i will only sell them with the Billet yokes as they were made round the forks....

I`m gonna say £650 for the front end...

Both sets of yokes
Forks
Wheel
Spindle
Calipers
Discs
clip ons
Mudguard & Bracket

Plus postage ( but would meet somewhere within reason ) IE if your in Birmingham I`ll meet you @ approx oxford ish area

Rgds