Indicator blanks for a Pointy?

Sorry if this has been asked before. But I have led indicators to put on my pointy. Where can I get some blanking caps so that they sit in place properly? Or does anyone have any? Also, will I need to put a relay in to make them flash at the normal rate or will it be ok when all 4 indicators in the circuit are LEDs?

[shiftin_gear98]

Got mine from Ebay.
http://www.ebay.co.uk/itm/Suzuki-SV6...item2a2ae32a07


Not sure I paid this much though, thought they were about a fiver posted.

Originally Posted by shiftin_gear98

Got mine from Ebay.
http://www.ebay.co.uk/itm/Suzuki-SV6...item2a2ae32a07


Not sure I paid this much though, thought they were about a fiver posted.

Thanks mate. Should have said mine is a 2008 so dont think these will fit. Il have a look on ebay to see if they have any. Did you have to fit resistors or a relay with your leds?

[shiftin_gear98]

Same thing - the panel hasn't changed.


Yes you'll need the resistors.

Originally Posted by shiftin_gear98

Same thing - the panel hasn't changed.


Yes you'll need the resistors.

Thanks mate. did yours come with resistors or can you point me in the directions of the right ones aswell?

[shiftin_gear98]

Sorry, they came with my indicators - Oxford ones.

Best not to bother with resistors. I'm in the middle of doing mine and have replaced the relay with one that controls any mix of LED and bulb indicators at the right flash rate. Cost me £15 on ebay and seems to work (still need to replace the front ones when the blanking plates arrive.)

Originally Posted by Ninthbike

Best not to bother with resistors. I'm in the middle of doing mine and have replaced the relay with one that controls any mix of LED and bulb indicators at the right flash rate. Cost me £15 on ebay and seems to work (still need to replace the front ones when the blanking plates arrive.)

Do you have a link to where you got yours? and where does the relay go?

Originally Posted by delkeough

Do you have a link to where you got yours? and where does the relay go?

The relay is located under the seat. I have just fitted mine and it's behaving a bit odd. The indicators don't work without the engine running (not really an issue, I guess), the dash indicators don't flash, they stay on and dim as the indies flash but everything else (fuel pump etc) all seem to be working. I have sent a message to the supplier to find out if the unit is faulty but meantime here is the link.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=400447710611

Originally Posted by Ninthbike

The relay is located under the seat. I have just fitted mine and it's behaving a bit odd. The indicators don't work without the engine running (not really an issue, I guess), the dash indicators don't flash, they stay on and dim as the indies flash but everything else (fuel pump etc) all seem to be working. I have sent a message to the supplier to find out if the unit is faulty but meantime here is the link.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=400447710611

Thanks. does this just go in place of the old relay or do i need the adaptor to plug this into?