Fuel Filter on a 2000 SV650 - SV650.org

29-03-05, 10:51 PM

Where is the fuel filter located on a 2000 sv650?

30-03-05, 05:10 AM

I'm not sure about the '00, but on my '04 it's integrated to the pump

embee · 30-03-05, 09:00 AM

As far as I'm aware there isn't a separate filter as such. There are strainers (fine mesh) in the tank tap and pump I seem to recall.

If you wanted to fit one I'd put it between the pump and carbs so it doesn't restrict the intake to the pump. The only downside would be more fuel sitting above the engine to cause vapour problems after hot soak.

30-03-05, 06:00 PM

my 99 didn't have one, i fitted a russel aluminum bodied sintered-bronze element one from an autoparts store (look in the performance aisle). its the best filtering you can get and its serviceable, ie: cleanable. and, it will flow way more than any bike will need.

30-03-05, 06:03 PM

Don't you guys have Haynes or Clymers anywhere for reference?

embee · 30-03-05, 06:16 PM

http://www.sv650.org/sv_manuals.htm

30-03-05, 06:18 PM

There you go!

29-03-05, 10:51 PM	#1
mackasper Guest Posts: n/a	Fuel Filter on a 2000 SV650 Where is the fuel filter located on a 2000 sv650?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where's me fuel filter?	Xerbraski	SV Talk, Tuning & Tweaking	11	09-08-10 05:37 PM
Fuel Filter Location?	Heed	SV Talk, Tuning & Tweaking	3	11-07-08 09:05 AM
K&n Air Filter Sv650s (2000)	lancasterlad	Stuff Wanted	1	09-07-07 05:15 PM
Fuel filter change	localhost	SV Talk, Tuning & Tweaking	2	27-03-06 09:35 PM
K&N Air Filter on 2000 Model Big improvement!!!!!	SpankyHam	SV Talk, Tuning & Tweaking	1	26-07-05 07:45 PM

30-03-05, 05:10 AM	#2
xaun Guest Posts: n/a	I'm not sure about the '00, but on my '04 it's integrated to the pump

30-03-05, 09:00 AM	#3
embee Member Mega Poster Join Date: Jul 2003 Location: Warwickshire Posts: 2,802	As far as I'm aware there isn't a separate filter as such. There are strainers (fine mesh) in the tank tap and pump I seem to recall. If you wanted to fit one I'd put it between the pump and carbs so it doesn't restrict the intake to the pump. The only downside would be more fuel sitting above the engine to cause vapour problems after hot soak.

30-03-05, 06:00 PM	#4
MARK IN SC Guest Posts: n/a	my 99 didn't have one, i fitted a russel aluminum bodied sintered-bronze element one from an autoparts store (look in the performance aisle). its the best filtering you can get and its serviceable, ie: cleanable. and, it will flow way more than any bike will need.

30-03-05, 06:03 PM	#5
xaun Guest Posts: n/a	Don't you guys have Haynes or Clymers anywhere for reference?

30-03-05, 06:16 PM	#6
embee Member Mega Poster Join Date: Jul 2003 Location: Warwickshire Posts: 2,802	http://www.sv650.org/sv_manuals.htm