nightmare***all sorted thanks quest21 - SV650.org

22-11-05, 03:22 PM

when i bought my bike it only had 1 key
stupidly i kept putting off getting another one cut and now the other one has been er misplaced. even more daft is that i dont have the key no.
have phoned the dealer and suzuki and both said they have no records so cant help.
ive heard the keyno. is underneath the ignition barrel. anyone else heard this? and would i need any special tools to remove it? any info would be hugely appreciated as the bike is chained up elsewhere

ta

23-11-05, 12:49 AM

a locksmith can mesure inside your barrel and make a key to suit.
my friend did the same with his kwak.

will probably be pricey and expect the locksmith to check out your details first though.

23-11-05, 06:54 AM

get in contact with james at J.S GEDGE motorcycles in silchester road, St Leonards on sea, sussex.- if you can take off your ignition barrel and post it to him he has someone who can remake you a set of replacment keys for the ignition.it costs about £20/25. i know cos he got me a set made for my curvey!it takes about a week!

23-11-05, 07:51 AM

The key number was written on the seat lock barrel could not see it on the ignition barrel on my K3.

TSM · 23-11-05, 03:12 PM

is it not written in the service book for the bike??

23-11-05, 03:44 PM

Quote:

Originally Posted by busasean

get in contact with james at J.S GEDGE motorcycles in silchester road, St Leonards on sea, sussex.- if you can take off your ignition barrel and post it to him he has someone who can remake you a set of replacment keys for the ignition.it costs about £20/25. i know cos he got me a set made for my curvey!it takes about a week!

looks like this is the way forward. is the barrell easy enough to get off? any special tools?

no key number in servece book unfortunatley and i cant get to the seat lock barrell to have a look there for the no.

23-11-05, 03:53 PM

You will need a security star drive to remove the ignition. It's basically a large six pointed star shape with a hole in the middle.

If you can borrow an ignition from someone else you can swap the head and barrel over using two philips screws so at least you can start the bike and get it somewhere safe.

23-11-05, 04:39 PM

hmmm

23-11-05, 04:41 PM

Quote:

Originally Posted by Mike1234

You will need a security star drive to remove the ignition. It's basically a large six pointed star shape with a hole in the middle.

If you can borrow an ignition from someone else you can swap the head and barrel over using two philips screws so at least you can start the bike and get it somewhere safe.

cheers.. something like this?

http://cgi.ebay.co.uk/32PC-SECURITY-...QQcmdZViewItem

21QUEST · 23-11-05, 07:23 PM

Quote:

Originally Posted by Mike1234

If you can borrow an ignition from someone else you can swap the head and barrel over using two philips screws so at least you can start the bike and get it somewhere safe.

If you need to borrow an ignition send me a PM. I can stick one in the post tomorrow so you get it Friday.

Cheers
Ben

22-11-05, 03:22 PM	#1
bobbydazzler Guest Posts: n/a	nightmareall sorted thanks quest21* when i bought my bike it only had 1 key stupidly i kept putting off getting another one cut and now the other one has been er misplaced. even more daft is that i dont have the key no. have phoned the dealer and suzuki and both said they have no records so cant help. ive heard the keyno. is underneath the ignition barrel. anyone else heard this? and would i need any special tools to remove it? any info would be hugely appreciated as the bike is chained up elsewhere ta

23-11-05, 03:12 PM	#5
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	is it not written in the service book for the bike?? __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2 up nightmare - Help!	Jackie_Black	Bikes - Talk & Issues	17	20-02-09 02:19 PM
Nightmare of a k1	philbert	SV Talk, Tuning & Tweaking	9	02-01-09 07:21 PM
My Thruxton nightmare...	DaveW_42	Photos	29	21-12-08 03:55 PM
insurance nightmare	kwak zzr	Idle Banter	4	02-02-07 04:32 PM
1st gear nightmare	atko	SV Talk, Tuning & Tweaking	5	14-04-05 04:29 PM

23-11-05, 12:49 AM	#2
Warren Guest Posts: n/a	a locksmith can mesure inside your barrel and make a key to suit. my friend did the same with his kwak. will probably be pricey and expect the locksmith to check out your details first though.

23-11-05, 06:54 AM	#3
busasean Guest Posts: n/a	get in contact with james at J.S GEDGE motorcycles in silchester road, St Leonards on sea, sussex.- if you can take off your ignition barrel and post it to him he has someone who can remake you a set of replacment keys for the ignition.it costs about £20/25. i know cos he got me a set made for my curvey!it takes about a week!

23-11-05, 07:51 AM	#4
Brucey Guest Posts: n/a	The key number was written on the seat lock barrel could not see it on the ignition barrel on my K3.

23-11-05, 03:53 PM	#7
Mike1234 Guest Posts: n/a	You will need a security star drive to remove the ignition. It's basically a large six pointed star shape with a hole in the middle. If you can borrow an ignition from someone else you can swap the head and barrel over using two philips screws so at least you can start the bike and get it somewhere safe.