main engine mount? - SV650.org

26-11-06, 06:41 PM

anyone know if the main engine mount (bar that goes right through the engine) is the same on the sv1000 as it is on the sv650? ive got to get a new one and theres one on Ebay at the moment for £7.

26-11-06, 06:48 PM

Not sure which of the 3 you are referring to, but here are the fiche pages + parts numbers:

SV650S

SV1000S

Doesn't look like it.

26-11-06, 06:53 PM

bummer.

they diff me thinks and it costs more for the thou aswell

thanks for info lukemillar.

26-11-06, 07:25 PM

lukmillar where did you get those assembly drawings of the sv and the price lists? i noticed it is in american but it could be handy for me

26-11-06, 07:37 PM

yes do tell its a handy bit of info to have.

26-11-06, 08:44 PM

Sure,

I use:

http://www.bellssuzuki.com/fiche_select.asp

or

http://www.ronayers.com/fiche/GetMan.cfm

Ron Ayers have more manufacturers online, whereas Bell have better quality images. Prices do vary though when compared to the UK, but I guess you could use it as a guide. Part numbers are the same as UK though which is very handy for ordering parts here.

26-11-06, 08:54 PM

thanks.

26-11-06, 09:43 PM

why do you need a new engine mount?

Stu · 26-11-06, 09:44 PM

Bit confused. I thought I was first reply offering you mine - probably not much use as it's a 650 strange where my post went though

26-11-06, 10:02 PM

sorry about this i'll explain

the sv1000 has R&G crash protectors fitted well the alloy bits anyway underneath the fairing pannels, these are held on by removing the main engine mount bolt that goes all the way through the frame and engine and replacing it with the R&G bar and then you screw the alloy R&G holders to each side of the bike. well some numpty has threaded the bolt and i cant tighten them up so the main engine support is well looser than it should be, so i need either a sv1000 engine mount bolt or a new bar from R&G so i can tighten thing up. i have e mailed R&G about the price of a new bar but i'm still waiting for a reply.

26-11-06, 06:41 PM	#1
kwak zzr Guest Posts: n/a	main engine mount? anyone know if the main engine mount (bar that goes right through the engine) is the same on the sv1000 as it is on the sv650? ive got to get a new one and theres one on Ebay at the moment for £7.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Main Jets	SVDragRacer	Stuff Wanted	0	01-03-09 08:55 PM
Engine braking... any hazzards engine wise?	John 675	SV Talk, Tuning & Tweaking	21	28-03-08 07:20 PM
engine mount bolt question?	kwak zzr	SV Talk, Tuning & Tweaking	2	11-02-07 05:07 PM
engine mount bolts	riktherider	SV Talk, Tuning & Tweaking	2	03-12-06 08:11 PM

26-11-06, 06:48 PM	#2
lukemillar Guest Posts: n/a	Not sure which of the 3 you are referring to, but here are the fiche pages + parts numbers: SV650S SV1000S Doesn't look like it.

26-11-06, 06:53 PM	#3
kwak zzr Guest Posts: n/a	bummer. they diff me thinks and it costs more for the thou aswell thanks for info lukemillar.

26-11-06, 07:25 PM	#4
riktherider Guest Posts: n/a	lukmillar where did you get those assembly drawings of the sv and the price lists? i noticed it is in american but it could be handy for me

26-11-06, 07:37 PM	#5
kwak zzr Guest Posts: n/a	yes do tell its a handy bit of info to have.

26-11-06, 08:44 PM	#6
lukemillar Guest Posts: n/a	Sure, I use: http://www.bellssuzuki.com/fiche_select.asp or http://www.ronayers.com/fiche/GetMan.cfm Ron Ayers have more manufacturers online, whereas Bell have better quality images. Prices do vary though when compared to the UK, but I guess you could use it as a guide. Part numbers are the same as UK though which is very handy for ordering parts here.

26-11-06, 09:43 PM	#8
Ed Guest Posts: n/a	why do you need a new engine mount?

26-11-06, 09:44 PM	#9
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Bit confused. I thought I was first reply offering you mine - probably not much use as it's a 650 strange where my post went though

26-11-06, 10:02 PM	#10
kwak zzr Guest Posts: n/a	sorry about this i'll explain the sv1000 has R&G crash protectors fitted well the alloy bits anyway underneath the fairing pannels, these are held on by removing the main engine mount bolt that goes all the way through the frame and engine and replacing it with the R&G bar and then you screw the alloy R&G holders to each side of the bike. well some numpty has threaded the bolt and i cant tighten them up so the main engine support is well looser than it should be, so i need either a sv1000 engine mount bolt or a new bar from R&G so i can tighten thing up. i have e mailed R&G about the price of a new bar but i'm still waiting for a reply.