Hyperpro Springs SV650 - SV650.org

21-05-08, 03:14 PM

I have a set of progressive springs which came out of a 03 pointy, I am sure are made Hyperpro. (Ruled out Ohlins, Racetech, Hagon) They are 18" in length; I have not removed the old springs from my bike yet so cannot compare the lengths. Can anyone advise me if they have fitted these, 1st if they are longer than the original would i not need the spacer. 2nd I would need to know the air gap and the weight of oil to use.

My Bike is sv650s (06)

Dave

22-05-08, 01:22 PM

ive got hyper pro rear shocker but am not sure what size etc, its on a curvey

22-05-08, 05:23 PM

Cheers only need the info on the front Springs, does anyone have a manual for Hyperpro springs for the SV.

Dave

24-05-08, 10:28 AM

SAE 15 for the oil and with the fork fully compressed there should be a 140mm air gap when the oil is at the right level.
As for length, they are a fraction longer than the ones in my SK7 with 700 miles on them. Hyperpro recommended fitting them exactly as the originals were with regards to spacers.
Make sure the heavily coiled end of the spring is at the top!

24-05-08, 10:47 AM

are they purple?

24-05-08, 11:41 AM

Quote:

Originally Posted by silent11

are they purple?

Rear springs yes but not the front as they are internal obviously!

24-05-08, 11:44 AM

No, I don't think it would be wise to have paint on springs in oil.
The rear spring is purple though, I fitted mine with the damper turned around so you can't see the warning sticker!

21-05-08, 03:14 PM	#1
df1uk Guest Posts: n/a	Hyperpro Springs SV650 I have a set of progressive springs which came out of a 03 pointy, I am sure are made Hyperpro. (Ruled out Ohlins, Racetech, Hagon) They are 18" in length; I have not removed the old springs from my bike yet so cannot compare the lengths. Can anyone advise me if they have fitted these, 1st if they are longer than the original would i not need the spacer. 2nd I would need to know the air gap and the weight of oil to use. My Bike is sv650s (06) Dave Last edited by df1uk; 21-05-08 at 03:50 PM.

22-05-08, 01:22 PM	#2
sv_rory Guest Posts: n/a	Re: Hyperpro Springs SV650 ive got hyper pro rear shocker but am not sure what size etc, its on a curvey

22-05-08, 05:23 PM	#3
df1uk Guest Posts: n/a	Re: Hyperpro Springs SV650 Cheers only need the info on the front Springs, does anyone have a manual for Hyperpro springs for the SV. Dave

24-05-08, 10:28 AM	#4
R20MAD Guest Posts: n/a	Re: Hyperpro Springs SV650 SAE 15 for the oil and with the fork fully compressed there should be a 140mm air gap when the oil is at the right level. As for length, they are a fraction longer than the ones in my SK7 with 700 miles on them. Hyperpro recommended fitting them exactly as the originals were with regards to spacers. Make sure the heavily coiled end of the spring is at the top!

24-05-08, 10:47 AM	#5
silent11 Guest Posts: n/a	Re: Hyperpro Springs SV650 are they purple?

24-05-08, 11:44 AM	#7
R20MAD Guest Posts: n/a	Re: Hyperpro Springs SV650 No, I don't think it would be wise to have paint on springs in oil. The rear spring is purple though, I fitted mine with the damper turned around so you can't see the warning sticker!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hyperpro springs - which way up	simesb	SV Talk, Tuning & Tweaking	3	09-04-09 08:02 PM
hyperpro springs	sv650rider	SV Talk, Tuning & Tweaking	1	23-05-08 11:32 AM
Hyperpro Springs Problem	tricky	SV Talk, Tuning & Tweaking	5	06-08-07 10:56 AM
Hyperpro progressive Springs Preload	danf1234	SV Talk, Tuning & Tweaking	2	02-07-07 01:06 PM
Hyperpro or Ohlins Springs?	600+	Ancillaries	1	04-08-06 01:26 PM