SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
My bike is not happy. It is running very rough at low revs, making some loud pops and bangs (admittedly there is no baffle in my fuel exhaust). It often cuts out at idle too.
It seems to run reasonably well at higher revs (6k +). Any suggestions as to what the problem could be? It's a 2002 curvy |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
mine gets like that in the cold weather, i find i have to run it with the choke on for a while longer than id expect to no idea about the cause though, im open to ideas....
|
![]() |
![]() |
#3 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Choke plungers sticking.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Thanks for the replies. Seems a unanimous diagnosis. I'll look to getting it sorted!
|
![]() |
![]() |
#7 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,083
|
![]()
I agree. But, if it doesn't do it all the time then at this time of year it could also be carb icing- that's most pronounced at low revs and often causes stalling as the revs drop.
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
SOmething I was going to ask - does it occur only soon after start up, while the engine is warming up, or is it constant i.e. if it was carb icing, which is most prominent when the bike is "cold", then your bike would run fine after its warmed up (say, 30 minutes to be definatly sure!)
|
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
Yup. As in bad fuelling.
I'd check the carb balance afterwards too whilst working on it. |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
Mine popped and gurgled a bit on the roll off before fitting new Iridium plugs and shes sweet as a nut now. Is it a recent development or has it got progressivly worse over time?
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stall & oil light on when filtering | Nobbylad | Bikes - Talk & Issues | 7 | 03-11-08 06:31 PM |
sv1000s that stall/suspension | matsv650s | SV Talk, Tuning & Tweaking | 2 | 30-10-07 04:04 PM |
kill bill soundtrack bang bang | hovis | Idle Banter | 8 | 22-05-07 03:53 PM |
OK What was that? (popping noise on stall) | Baph | SV Talk, Tuning & Tweaking | 1 | 18-12-06 10:55 AM |
Engine Stall | Sassy | SV Talk, Tuning & Tweaking | 11 | 25-04-06 12:07 PM |