M4 exhaust parts - available?

hello forum

I have a small problem maybe you guys can help

I have a 2001 sv650s with a m4 full system.

At an MOT a year ago or so, the exhaust was changed, and the mounting bracket went missing, never to be found.

This has stuck me with the standard system again.

I have tried the UK M4 dealers who just gave me blank stares and said the could only supply full systems and not 'small parts'.

I was considering contacting M4 in USA but I cant find an email or phone number.

Does anyone have an email for M4? Or any possibilities of a UK dealer who might get the part for me? I would build a new one if I had a workshop, but I dont, so I am trying to buy one.

Any help appreciated.

Al

http://cgi.ebay.co.uk/Suzuki-SV650-S...3A1%7C294%3A50

That one fit?

Its a guy off this forum who makes/sells them.

Originally Posted by saoralba

http://cgi.ebay.co.uk/Suzuki-SV650-S...3A1%7C294%3A50

That one fit?

Its a guy off this forum who makes/sells them.

Unfortunately not, its the band that goes around the exhaust, the one that comes supplied with the can, rather than the hanger. Its like a steel band with a rubber bit in the inside, goes round the can and bolts onto the footrest hanger.. thanks for the reply tho. looks like I will have to make one.

[Dave20046]

could be worth finding out who the forummer is and contactign them.

http://www.m4exhaust.com/products/flash/M4_Exhaust.html

top right hand side of the page says contact

[rowdy]

Have you tried JHS, I phoned them about a year ago for this very reason but I think they wanted about £30 for one so had one made in the end.
However they don't seem to be the best made brackets or they wouldn't snap so your probably better off making one out of some descent material.

http://cgi.ebay.co.uk/MAKE-YOUR-OWN-...3A1%7C294%3A50

what bout one of these, doesnt have to be an m4 part does it? just make your own or measure it and get one with the same diameter. i brought a universal one and just shaped it to fit my can

scott

Originally Posted by rowdy

Have you tried JHS, I phoned them about a year ago for this very reason but I think they wanted about £30 for one so had one made in the end.
However they don't seem to be the best made brackets or they wouldn't snap so your probably better off making one out of some descent material.

I mailed JHS and they werent very helpful, jst said they didnt do parts and didnt know M4 contact details. no use at all, poor show JHS.

Originally Posted by scottjames

http://cgi.ebay.co.uk/MAKE-YOUR-OWN-...3A1%7C294%3A50

what bout one of these, doesnt have to be an m4 part does it? just make your own or measure it and get one with the same diameter. i brought a universal one and just shaped it to fit my can

scott

looks like it would do the job. could probably make it myself with a trip to B&Q!

thanks for the ideas folks. ill try get it fixed this week cos i love my m4 exhaust.