SV1000 throttle bodies on a 650?

Will the sv1000 k4 throtle bodys fit the sv650 k4 model.

[yorkie_chris]

Why? If you're TB's are too big then you'll have problems with the fuel not mixing right and other such stuff.

Not like the standard ones are overly restrictive anyway?

thanxs. anyway do you know where i can get a exhuast system with bigger pipes throught out from the head to the can I would like to boost the power on the bike.The mods I have done so far are the snorkel removel and put in a kandN in and a fuel end can as well as a renthal chain and sproket. can u help thanxs weeble.

[yorkie_chris]

M4, akra, arrow (iirc).

Bigger TB's won't boost the power that much with a standard engine

LeoVince, M4 and Arrow full systems are the big hitters with the Pointy's, what sort of power are you after???

just a in crece in hp and top speed at the mo the speed is 135

[yorkie_chris]

Speed is money, how fast do you want to go?

Originally Posted by yorkie_chris

Speed is money, how fast do you want to go?

Me about 30

[yorkie_chris]

Originally Posted by Weeble

just a in crece in hp and top speed at the mo the speed is 135

OK give me a couple of hundred quid and ill build you a nitrous system that'll give as much boost as you want

To be honest top speed hunting is a waste of time, how often is the bike there!!! An increase in BHP and Torque is easy to get with the above systems. My 750 is geared more for acceleration than speed, problem is she never wants to keep the front wheel down! This is a very expensive motor if you add up all the components prices, yes there is a increase in speed but it takes a lot of money to get there. Acceleration is the way to go with SV's.

Look at a full system, hunt around for a good price, but bear in mind you will need to get a bit of dyno time and either a PC fitted or getting the OEM CDI reworked.

No point going for power if the bike don't handle though, thats the SV's Achilles heel!