SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Member
Join Date: Feb 2008
Location: Appalachia
Posts: 419
|
![]()
My center light (between the headlights) isn't working.
Quit working after a crash mid 08 but didn't realise till after the bike was back together that it wasn't working. A quick check with a test probe shows no power at the socket. Wiring diagrams show this same wire/circut also powers the tail and plate lights which both work. My question is: Are there accessable wires running to the back of the socket where I might could do some possible re-wiring or is this part of a circuit board type assembly??? Can't seem to find any specific info in Clymer manual.
__________________
...Bill "The Mountains are calling and I must go" |
![]() |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Feb 2008
Location: Riding, North
Posts: 2,664
|
![]()
According to the Haynes manual, the earth wire ( black & white ) connects to the same earth as the headlamps, signals & horn switch.
The brown feed wire joins the tail & plate lights and goes into the ignition switch. Pretty sure it's a wiring rather than circuit board job, but don't rely on me!
__________________
Was: K2 naked in rapid yellow ![]() Now: Street Triple R |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Light Mod Question | Amanda | SV Talk, Tuning & Tweaking | 12 | 17-10-09 04:36 PM |
Tail Light Wiring | pale rider | SV Talk, Tuning & Tweaking | 3 | 06-08-09 08:52 PM |
quick Pointy wiring loom question | chunkytfg | SV Talk, Tuning & Tweaking | 1 | 07-02-08 07:36 PM |
number plate light wiring | ayfy | SV Talk, Tuning & Tweaking | 6 | 26-07-06 02:40 PM |
Indicator wiring question!! | lodman27 | SV Talk, Tuning & Tweaking | 2 | 26-03-05 07:13 PM |