SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
I've got a set of resistors (25W?) to stop the rapid flashing of the indicators, when I've installed them nothin happens at all, not even a flash.
Now it may just be me being thick, but do they attach 'inline' between the indicator connection and the indicator cable for the bike? Tried to turn them the other way to see if it makes a differance but to no avail. All help appreciated as I want to get the bike through the MOT soon and I currently have the choice of rapid flashing or nothing at all ![]() |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Jul 2003
Location: Warwickshire
Posts: 2,804
|
![]()
not in series (in-line) with the LEDs.
They should be parallel to the LEDs, i.e. the resistor is connected between the live indicator supply and the earth, and so is the LED. The resistors are not polarity conscious, they can go either way round. |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
Sorted
![]() Cheers mate ![]() |
![]() |
![]() |
#4 | |
Guest
Posts: n/a
|
![]() Quote:
![]() ![]() |
|
![]() |
![]() |
#5 |
Moderator
Mega Poster
Join Date: Nov 2003
Location: The exiles of Kent
Posts: 2,184
|
![]()
Can you tell me what resistance they are?
__________________
SV650 K3 - Gone. Now a member of the SV650.org Kawasaki brigade! |
![]() |
![]() |
![]() |
#6 | |
Guest
Posts: n/a
|
![]() Quote:
![]() I’ve got a pair of them if you want ‘em ![]() |
|
![]() |
![]() |
#7 |
Moderator
Mega Poster
Join Date: Nov 2003
Location: The exiles of Kent
Posts: 2,184
|
![]()
6 Ohms... is that all!
I'm guessing that I'd need 4 resistors if I were to do all 4 indicators (which is what I want to do). Cheers all the same Cloggsy! Motrax are pretty crappy... can anyone recommend something with some more quality?
__________________
SV650 K3 - Gone. Now a member of the SV650.org Kawasaki brigade! |
![]() |
![]() |
![]() |
#8 |
Member
Mega Poster
Join Date: Jul 2003
Location: Darn sarf, innit
Posts: 2,025
|
![]()
I fitted 10 watt 10 ohm resistors on my Motrax LEDs. 19p each from Maplins - see here:-
http://www.maplin.co.uk/Module.aspx?...ldID=3&doy=7m2
__________________
2000 - 2004 SV650S 2004 - 2009 SV1000S 2009 - 2013 Triumph Sprint ST1050 2013 - 2016 Triumph Explorer 1200 2016 - Ducati Multistrada DVT S ![]() |
![]() |
![]() |
![]() |
#9 |
Member
Mega Poster
Join Date: Jul 2003
Location: Warwickshire
Posts: 2,804
|
![]()
in simple numbers, 6 Ohms at 12volts = 2 Amps current and 24 Watts power.
10 Ohms gives 1.2 Amps and 14.4Watts. You're trying to substitute for a 21Watt bulb (at 12V nominally). Since the voltage is more like 14V usually the power will be a bit higher than these numbers. As far as the indicator unit is concerned, either is probably near enough to keep the flash rate correct. According to the listings, 6.8 Ohms (6R ![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
resistors for indicators | sv650nutter149 | Stuff Wanted | 2 | 08-02-09 08:39 PM |
resistors for lED indicators | Quiff Wichard | SV Talk, Tuning & Tweaking | 13 | 27-04-06 07:00 PM |
WHO PM'd ME ASKING FOR RESISTORS? | Cloggsy | Idle Banter | 6 | 11-04-06 10:54 AM |
LED indicators and resistors | Warren | SV Talk, Tuning & Tweaking | 8 | 03-05-05 04:28 PM |
Signal Resistors... | ahlb0018 | SV Talk, Tuning & Tweaking | 7 | 17-02-05 10:02 AM |