Bellypan brackets - help required. - SV650.org

02-06-05, 05:06 PM

Got hold of a pyramid bellypan which is missing fixings. No way I'm paying pyramid £40 for a new set, but any pictures, scans of fitting instructions or descriptions would assist in my bodging together some replacements

TIA

02-06-05, 09:38 PM

my powerbronze belly pan is held into place by 4 metal brackets which fit on to the engine,just bolt 4 on and bend them to match the b pan.
i can get a pic of my b pan if it would help?
daz

02-06-05, 11:07 PM

They go behind existing bolt heads in the crankcase/clutch cover/whatever is nearest then?

03-06-05, 04:36 PM

yes,i'll try and find a picture out for you.
daz(midlands)

03-06-05, 06:36 PM

Ah, cool. That helps a lot, thanks.

03-06-05, 09:30 PM

this is the best i can do mate! sorry i cant be of anymore help.
daz(midlands)

05-06-05, 12:34 AM

Great, I'll work it out from there. Thanks for your efforts. I appreciate it.

IanG · 06-06-05, 10:53 PM

My belly pan was mounted higher up, such that the oil radiator was resting on the bottom of the belly pan side cutouts and has slightly destorted the plastic

.
I have moved the brackets to the position as indicated on your photo Daz (kwak zzr)

, but I can''t make out where the brackets go on the gear pedal side. I don't want to cut the bracket until I am sure I have it mounted in the correct casing bolt postition. So do you (or any one else) a photo from the gear pedal side

Ian

08-06-05, 09:17 PM

i'll sort one out but it will take me a day or so.
daz

IanG · 08-06-05, 09:48 PM

cheers mate it'll be appreciated

02-06-05, 05:06 PM	#1
Smiffy Guest Posts: n/a	Bellypan brackets - help required. Got hold of a pyramid bellypan which is missing fixings. No way I'm paying pyramid £40 for a new set, but any pictures, scans of fitting instructions or descriptions would assist in my bodging together some replacements TIA

06-06-05, 10:53 PM	#8
IanG Member Join Date: May 2005 Location: Gateshead, England Posts: 212	My belly pan was mounted higher up, such that the oil radiator was resting on the bottom of the belly pan side cutouts and has slightly destorted the plastic . I have moved the brackets to the position as indicated on your photo Daz (kwak zzr) , but I can''t make out where the brackets go on the gear pedal side. I don't want to cut the bracket until I am sure I have it mounted in the correct casing bolt postition. So do you (or any one else) a photo from the gear pedal side Ian __________________ 2018 Honda CBR650FA

08-06-05, 09:48 PM	#10
IanG Member Join Date: May 2005 Location: Gateshead, England Posts: 212	cheers mate it'll be appreciated __________________ 2018 Honda CBR650FA

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
calliper brackets help	svtomo	SV Talk, Tuning & Tweaking	0	31-03-09 04:51 PM
brackets to fit my lowers	ICAEW	Stuff Wanted	2	12-12-07 10:19 PM
Brackets	jon8oy	Stuff Wanted	1	02-12-07 02:56 PM
Poly 26 brackets	Sudoxe	SV Talk, Tuning & Tweaking	2	08-08-05 12:52 PM
hugger and brackets	chris SVK3	SV Talk, Tuning & Tweaking	0	23-03-05 08:32 PM

02-06-05, 09:38 PM	#2
kwak zzr Guest Posts: n/a	my powerbronze belly pan is held into place by 4 metal brackets which fit on to the engine,just bolt 4 on and bend them to match the b pan. i can get a pic of my b pan if it would help? daz

02-06-05, 11:07 PM	#3
Smiffy Guest Posts: n/a	They go behind existing bolt heads in the crankcase/clutch cover/whatever is nearest then?

03-06-05, 04:36 PM	#4
kwak zzr Guest Posts: n/a	yes,i'll try and find a picture out for you. daz(midlands)

03-06-05, 06:36 PM	#5
Smiffy Guest Posts: n/a	Ah, cool. That helps a lot, thanks.

03-06-05, 09:30 PM	#6
kwak zzr Guest Posts: n/a	this is the best i can do mate! sorry i cant be of anymore help. daz(midlands)

05-06-05, 12:34 AM	#7
Smiffy Guest Posts: n/a	Great, I'll work it out from there. Thanks for your efforts. I appreciate it.

08-06-05, 09:17 PM	#9
kwak zzr Guest Posts: n/a	i'll sort one out but it will take me a day or so. daz