SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
i changed the oil and the filter by myself. did about 350 miles. after got some trouble with the gear changing...noisy changes, hard to change...
checked the oil lever and it was near the F sign. when i change it, the oil lever was ok. how it could happen? help ![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
The oil should be on the "F" mark with the bike level and vertical. Can you clarify the symptoms?
|
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
you right, the bike is vertical and stands on the wheels in level. by the manual, oil level should be in the middle of the glass window?
i put aral semi synthetic oil...does that make sense? thanx |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
nothing to do with the help part but i always use fully synthetic ... i think
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
i decided to change it more often, so put semi synthetic...and i dont rev the engine very hard, cos its me first real bike
![]() |
![]() |
![]() |
#6 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
Anywhere between the marks will do, I keep mine at the full mark. Type of oil will not affect the level. Is the oil the correct spec?
|
![]() |
![]() |
#8 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]()
Did you measure out the 2.8 lites(or whatever it is) first below pouring it in?
If so there is no chance all the oil will have come out, and you might have over filled. ![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
I pour around 2,7 litres into. now the oil level is a bit below F...i would say i was stressing about it too much...
![]() will hit the road tomorrow ![]() |
![]() |
![]() |
|
|