Replacement bolt..updated know what I need now - SV650.org

19-01-06, 01:36 PM

Where can I buy just one (or a small number) of a large and fairly unusual bolt. I've chewed the head of one on my bashplate and its fine at the mo but will need to be replaced before I (well...they

) can get the oil filter off). Anywhere online?

Is not the kind of thing you'd get in bolt sets, its a recessed or countersunk flat head with either an allen or torx or hex.........you know funnel shape.
Whats one of them called? Don't know size off hand but as you can see falling at first hurdle here.

(I suppose this is bike talk rather than idle banter....its a bike bolt

)

TSM · 19-01-06, 01:39 PM

chewy22 sells bolts on his website.

19-01-06, 01:40 PM

Quote:

Originally Posted by Dr Rich

I've chewed the head of one on my bashplate...

No carbs but as much metal as you can eat eh?

.

timwilky · 19-01-06, 07:53 PM

for one offs and those hard to find Jap metric fine bolts I use Hyperbolt. they also do a few othe goodies like disc bolts, titanium etc.

19-01-06, 10:40 PM

i guess that its a allen headed countersunk bolt then

19-01-06, 11:24 PM

Won't they do it at the beemer garage?

19-01-06, 11:34 PM

Quote:

Originally Posted by Saint Matt

Won't they do it at the beemer garage?

No, its an add on. The GS12 is all hex head bolts, and the aftermarket bits you get all have allen heads so its a bit of a nuisance.

Cheers guys, I'll try these suggestions.

19-01-06, 11:38 PM

Dr.Rich wrote:

Quote:

you know funnel shape

Ah bless!

My engineering training also helps me to confirm that this sounds like a allen headed counter sunk bolt.

19-01-06, 11:43 PM

If you can be a bit more precise on the size ( ie what size allen key you use and the bolts length ) i should be able to source them for you ( the advantage of having a full engineering workshop at your disposal )

20-01-06, 01:58 PM

yell.co.uk says:

Talbot-Owen Tools & Fasteners Ltd
Stoke View Rd, Fishponds, Bristol, Avon BS16 3AE
Tel: 0117 965 4221
Classification:
Bolt & Nut Stockists

In a little industrial estate, just opposite the end of Lodge Causeway.

I had a couple of bolts to replace my rusted-to-hell chain adjusters, less than a pound. I got the impression that they're used to people coming in with unusual requests.

19-01-06, 01:36 PM	#1
Anonymous Guest Posts: n/a	Replacement bolt..updated know what I need now Where can I buy just one (or a small number) of a large and fairly unusual bolt. I've chewed the head of one on my bashplate and its fine at the mo but will need to be replaced before I (well...they ) can get the oil filter off). Anywhere online? Is not the kind of thing you'd get in bolt sets, its a recessed or countersunk flat head with either an allen or torx or hex.........you know funnel shape. Whats one of them called? Don't know size off hand but as you can see falling at first hurdle here. (I suppose this is bike talk rather than idle banter....its a bike bolt )

19-01-06, 01:39 PM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	chewy22 sells bolts on his website. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

19-01-06, 07:53 PM	#4
timwilky Member Mega Poster Join Date: Mar 2004 Location: Not in Yorkshire. (Thank God) Posts: 4,116	for one offs and those hard to find Jap metric fine bolts I use Hyperbolt. they also do a few othe goodies like disc bolts, titanium etc. __________________ Not Grumpy, opinionated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fairing bolt / Mirror bolt	MiniMac	Stuff Wanted	0	02-07-08 10:26 AM
how to get the sump plug/bolt or filter bolt out without murdering someone?	Paul the 6th	Bikes - Talk & Issues	11	31-05-08 10:49 AM
Updated pic of my SV	scarlett	Photos	27	17-08-07 10:00 PM
Help me build a spare bolt box; what are all the common bolt	F16Falcon	SV Talk, Tuning & Tweaking	10	07-05-07 08:42 AM
Seat Bolt and bar end bolt	Colby	Stuff Wanted	3	04-04-07 04:56 PM

19-01-06, 10:40 PM	#5
amarko5 Guest Posts: n/a	i guess that its a allen headed countersunk bolt then

19-01-06, 11:24 PM	#6
Saint Matt Guest Posts: n/a	Won't they do it at the beemer garage?

19-01-06, 11:43 PM	#9
mac Guest Posts: n/a	If you can be a bit more precise on the size ( ie what size allen key you use and the bolts length ) i should be able to source them for you ( the advantage of having a full engineering workshop at your disposal )

20-01-06, 01:58 PM	#10
iprideaux Guest Posts: n/a	yell.co.uk says: Talbot-Owen Tools & Fasteners Ltd Stoke View Rd, Fishponds, Bristol, Avon BS16 3AE Tel: 0117 965 4221 Classification: Bolt & Nut Stockists In a little industrial estate, just opposite the end of Lodge Causeway. I had a couple of bolts to replace my rusted-to-hell chain adjusters, less than a pound. I got the impression that they're used to people coming in with unusual requests.