exhaust can conversion kit? - SV650.org

20-10-06, 08:54 AM

I have jst bought a scorpion carbon fibre end can, with link pipe off ebay. Before I go ahead and fit it to my 2001 sv650s (otherwise known as pride and joy!) I have a few questions that I am sure you educated lot can help with!

1) I understand I need to cut the original exhaust to fit this, but can you buy a conversion kit for if you ever want to put the original back on?

2) Is it straight forward enough, or are there likely to be any running problems?

3) Is there any where you can buy baffles only from.......I have contacted a local scorpion dealer who thinks not but is this just a dealer answer! Surely people lose baffles!

4) Any other info you think may help would be much appreciated !

Thanks for reading.....

20-10-06, 10:26 AM

Quote:

Originally Posted by Tomcat

I have jst bought a scorpion carbon fibre end can, with link pipe off ebay. Before I go ahead and fit it to my 2001 sv650s (otherwise known as pride and joy!) I have a few questions that I am sure you educated lot can help with!

1) I understand I need to cut the original exhaust to fit this, but can you buy a conversion kit for if you ever want to put the original back on?

Yes. Usually jsut a bit of hollow pipe, slightly bigger than both exhaust and end can and allows them to be reconnected.

2) Is it straight forward enough, or are there likely to be any running problems?

Straightforward enough, I've not had any running problems and msot people seem to be fine.

3) Is there any where you can buy baffles only from.......I have contacted a local scorpion dealer who thinks not but is this just a dealer answer! Surely people lose baffles!

Err...did your can originally have a baffle? If so, I'd buy another scorpion off ebay with one in it, take the baffle and then sell on the other one as road legal but requiring a replacement baffle.

4) Any other info you think may help would be much appreciated !

Thanks for reading.....

20-10-06, 10:45 AM

nice one thanks... thought no one was speaking to me!

20-10-06, 06:19 PM

I've just bought 2 baffle's for my cans from the local bike shop.. tenner each. They were a universal fit type of thing with the BS No stamped on... not that they made it much quieter

good enough for pc plod tho

20-10-06, 08:33 PM

Just so hapens... someone is selling one on here...

http://forums.sv650.org/viewtopic.php?t=46652

21-10-06, 12:20 PM

If i buy a universal fitting baffle will it be easy to fiy to my scorpian??

21-10-06, 06:54 PM

You normaly only have to drill a hole in the tail pipe to fit one.. if its not got one that is. One bolt holds it in.

26-10-06, 12:09 PM

Just to let ya no. I have fitted the can, sounds excellent. Also bought a baffle which can be fitted (had to bend it slightly though!) and does quieten it, a little. Nearly wet my pants when I first went up the rode on the bike, love it! No running problems either, got a small piece of pipe for if I want to re-install the original, but cant see that happening!

20-10-06, 08:54 AM	#1
Tomcat Guest Posts: n/a	exhaust can conversion kit? I have jst bought a scorpion carbon fibre end can, with link pipe off ebay. Before I go ahead and fit it to my 2001 sv650s (otherwise known as pride and joy!) I have a few questions that I am sure you educated lot can help with! 1) I understand I need to cut the original exhaust to fit this, but can you buy a conversion kit for if you ever want to put the original back on? 2) Is it straight forward enough, or are there likely to be any running problems? 3) Is there any where you can buy baffles only from.......I have contacted a local scorpion dealer who thinks not but is this just a dealer answer! Surely people lose baffles! 4) Any other info you think may help would be much appreciated ! Thanks for reading.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
650 K3 Naked Twin Exhaust Conversion	SV-net	SV Talk, Tuning & Tweaking	10	09-04-08 04:54 PM
twin exhaust conversion	jon8oy	Stuff Wanted	10	06-06-07 06:19 AM
m4a - mp3 conversion	embee	Idle Banter	17	04-06-07 09:22 AM
TL 1000 Exhaust Conversion??	gilligan5000	Exhausts	1	16-02-05 02:57 PM
which air box conversion?	Londonoz	Exhausts	2	20-01-05 02:43 PM

20-10-06, 10:45 AM	#3
Tomcat Guest Posts: n/a	nice one thanks... thought no one was speaking to me!

20-10-06, 06:19 PM	#4
suicidesam Guest Posts: n/a	I've just bought 2 baffle's for my cans from the local bike shop.. tenner each. They were a universal fit type of thing with the BS No stamped on... not that they made it much quieter good enough for pc plod tho

20-10-06, 08:33 PM	#5
suicidesam Guest Posts: n/a	Just so hapens... someone is selling one on here... http://forums.sv650.org/viewtopic.php?t=46652

21-10-06, 12:20 PM	#6
skulpt Guest Posts: n/a	If i buy a universal fitting baffle will it be easy to fiy to my scorpian??

21-10-06, 06:54 PM	#7
suicidesam Guest Posts: n/a	You normaly only have to drill a hole in the tail pipe to fit one.. if its not got one that is. One bolt holds it in.

26-10-06, 12:09 PM	#8
Tomcat Guest Posts: n/a	Just to let ya no. I have fitted the can, sounds excellent. Also bought a baffle which can be fitted (had to bend it slightly though!) and does quieten it, a little. Nearly wet my pants when I first went up the rode on the bike, love it! No running problems either, got a small piece of pipe for if I want to re-install the original, but cant see that happening!