Bike mods - thanks to Amuli and Simple Simon.

[SoulKiss]

Still a WIP, but thanks to Amuli for his old Hamicad and Simple Simon for the Seat Cowl, Hugger and Screen, my bike is now like this.....

Hugger (and a little bit of the Tailtidy)



The new dark screen


Tailtidy and prepped side panel for respray.



Tail without grab rail with the prepped fillers from the seat cowl kit, rear filler panel prepped for respray



David

Red and black gloves to match! You're as much as a tart as me!

Only thing, that hugger is simply not big enough, it ought to cover at least 50% of the wheel, based on current style trends.

Originally Posted by Ed

Only thing, that hugger is simply not big enough, it ought to cover at least 50% of the wheel, based on current style trends.

Set by whom?

[SoulKiss]

Originally Posted by Ed

Red and black gloves to match! You're as much as a tart as me!

Only thing, that hugger is simply not big enough, it ought to cover at least 50% of the wheel, based on current style trends.

You didnt see THIS wot I go from the US ????

Originally Posted by Filipe M.

Set by whom?

Everyone knows that the Welsh lead the world in matters of style

Oh and David - that jacket is the mutts' but there appears to be a limbless torso inside it

I take it like all the top superheroes you have the 8-pack underneath to match the jacket?

[SoulKiss]

Originally Posted by MeridiaNx

I take it like all the top superheroes you have the 8-pack underneath to match the jacket?

Better than that - I got a keg

Originally Posted by SoulKiss

Better than that - I got a keg

Party at soulkisss jacket

Really cool jacket though, what material is it? It dosnt look leather. How much?!

Matt

[SoulKiss]

UPDATE !!!

Got to practice my spraypainting at the weekend, building up to the big side panel respray.

Was looking for a large lump of plastic to test-spray, as just doing the filler pieces and the back top section of the fairing seemed not enough.

Lo and behold I "find" the rest of the seat cowl, so after a bit of wet-n-dry action, I got it prepped and sprayed.

So the back end of the bike is now a lot like this



Halfords Satin Black, unlaquered for those curious.

As for the jacket - it was part of my US haul and is a mesh fabric - Icon call it their "Fighter Mesh". Jacket is a Timax2 Mesh one - also available in Nylon and Leather

Cost me $240 US - so about £120 - well before 40% shipping and tax.....

Looking good there SoulKiss.